York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Conical 14

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B114. Grade: RA80. Diameter: 6mm. Length: 10mm. Max. rpm: 68,000. Weight per 10: 20g.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Circular Brushes - Shaft Mounted

Suitable for use in power drills. Most suitable for hard to reach areas and grooves. 6mm Shanks. 30 SWG

18V Cordless Impact Wrench

Same fastening torque in forward and reverse rotations with full torque at 6 seconds after seating. Compact design provides more control and maneuverability. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact. The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are joined with vibration absorbing cushion rubbers. The large bumper protects workpiece from scratches,increasing maneuverability. Ergonomically designed handle with rubberized soft grip provides more control and comfort. Easy-to-operate LED light for illuminated operation can be turned on or off with an independent switch, and features an over-discharge-protective circuit. Also features a hanging hook.

Capacity: Standard bolt:M12 - M22; High tensile bolt: M12 - M16
Impacts per minute: 2,200
No load speed: 1,600rpm
Maximum torque 440Nm
Dimensions (L x W x H) 266mm x 82mm x 290mm
Net weight: 3.4kg

Naked tool only - Batteries and Charger not supplied.

Magtron Magnetic Drilling Machines

This machine is ideal for tapping, reaming and drilling of large diameters. it has a clutched gear box for extra protection and safety cut out to protect the operator. Supplied with drift key, safety hook, cutting oil, allen key and carrying case. Tapping heads and collets to be ordered seperately.

MT30/MTE30 - Variable Speed Tapping Drilling System

Dimensions (H x W x L ): 500mm x 135mm x 320mm.
Clamping force: 1700kg/4000lbs.
MT 30 power unit: B4 32 AEG.
Power input: 1100W.
MTE 30 power unit: Eibenstock.
Power input: 1800W.

Kobe™ Micro Air Die Grinder

For precision grinding etc. With hose and silencer.

Specifications:
1/4" NPT air inlet thread for 5mm air hose.
90PSI air pressure,
7CFM* air consumption.
Free speed: 56,000rpm.
Sound pressure level: 76dBA.
Sound power level: N/A dBA.
Vibration level: 4.80m/s2.
Collet size: 3mm.
Overall length: 156mm.

*Based on a 15 second cycle per minute average use.

240V "H.I.G." Industrial Cable Reels

Heavy duty frame. Extremely rust resistant, galvanised and powder coated finish. With comfortable, insulated carrying handle. Equipped with duo-safety-system against overheating and accidental restart. LED indicates overheating or overload. Highly flexible Breflex safety cable. Maximum capacity 3120W,13A. 1.5mm2 core.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Plain (no hole)

Diameter: 150mm.

York? Linisher Belts

York sanding belts to suit a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



50mm (2") Wide x 1065mm (42") Long.

13mm Rotary Drill

Electronic, variable speed with forward and reverse action. Drill spindle with hexagon socket for direct insertion of screwdriver bits. Small width across corners of 29mm. Fully ball and roller bearing-mounted.

Power output: 287W.
Power input: 500W.
Rated torque: 11,5 /- 6,0 Nm.
Chuck: 13mm Keyless.
No load speed: (1st gear) 0-550 rpm / (2nd gear) 0-1.000rpm.
Drilling range: (1st gear) Aluminium 20mm / Wood 32mm / Steel 13mm.
Drilling range: (2nd gear) Aluminium 12mm / Wood 20mm / Steel 8mm.

GBM 13-2RE