Makita Metal Nibbler

Zips through sheet metal, plastics and other sheet materials. Built-in thickness gauge for convenience with easy punch and die replacement for reduced down time.
Input wattage: 660w
Strokes per minute: 1,300spm
Max. Cut in Mild Steel: 3.2mm
Max. Cut in Stainless Steel: 2.5mm
Min. Cutting Outside Edge: 128mm
Radius Inside Edge: 120mm
Weight: 3.50kg
Supplied with:
3mm hex wrench, punch & die set, spacers x 2.

JN3200

Kennedy® Router Cutters

Cutter for deep mortising and grooving. Staggered cutting edges give good chip clearance enhancing quality of cut.

Two Flute Staggered Tooth Bits

3M Type 41 Flat Reinforced Cut-Off Discs

General-purpose aluminium oxide cut off wheels for accurate, clean cutting of all metals including stainless steel. Fibre reinforced, type BF. Format type 41. Made to EN12413.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Creusen 150mm (6") Bench Grinder

With a standard 5 year warranty, even for industrial usage, and designed for engineering/industrial applications that require robustness, reliability and efficiency the Creusen is a premium quality grinder. Fitted with maintenance-free motors with dynamically balanced rotors, they are virtually noise-free. Complete with two adjustable eye guards and tool rests, fitted with spark arrestors and anti-vibration mounts.

No load speed: 3000rpm (all models)

Spindle diameter: 15mm

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A39. Grade: RA60. Diameter: 19mm. Length: 19mm. Max. rpm: 47,000. Weight per 10: 160g.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

DMT Diamond Whetstones

Made with real diamond (monocrystaline). Easy to use - requires only light pressure to produce a keen edge. Uses water as a lubricant. Can be used to hone and sharpen steel, ceramics, glass, tungsten carbide, stone, etc.

150mm Bench Whetstones

Overall dimensions: 152 x 50 x 30mm. With durable non-slip case.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez E.D.M. Hard/Aluminium Oxide

Rectangle. Specially formulated for EDM scale removal. Length: 150mm.