Dewalt Cordless Drills

Multi position side handle. Multi-voltage charger.
2 slide batteries. Heavy duty kit box.
Featuring NEW XR 4.0Ah Li-Ion battery technology.
Tough 3 speed all metal transmission for increased run time and longer tool life.
22 position adjustable torque control for optimised precision when screwdriving.
13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes.
Efficient intelligent trigger allowing total control over all applications.
Bright white LED with delay feature for improved visibility and flashlight functionality. Improved grip design providing greater application control and maximum comfort.
Steel belt clip and tough magnetic bit holder ensure strong storage solutions.



DCD980M2 18V (4.0Ah) Li-Ion Drill driver

Dewalt DCD980M2 18V (4.0Ah) Li-Ion Drill driver specification:
Voltage: 18V.
Chuck capacity: 1.5 - 13mm.
Power output: 500W.
No load speed: 0 - 575/0 - 1350/0 - 2,000rpm.
Maximum torque: 80Nm.
Drilling capacities:
Steel 13mm
Wood 50mm.
Weight: 2.4kg.

Supplied with:
Batteries: 2x 4.0Ah.
Multi voltage charger for use with 18V, 14.4V and 10.8V XR Li-Ion slide pack batteries.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 90 Inc. Angle

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Nilfisk ALTO Industrial Hot Water Pressure Washer

The Neptune 1 is a compact, mobile hot water high pressure washer with a unique vertical design, which gives good possibilities for storage and transportation. Ideal for use by garages, car dealers, tradesmen and small construction companies. Complete with Ergo accessory system for additional user comfort.

Neptune 1 Industrial Hot Water Pressure Washer

Neptune 1 Specifications:
Voltage: 230V.
Motor rated power: 2.8kW.
Pistons: 3 Stainless.
Maximum water flow: 600ltr/hr.
Pump pressure: 110 bar.
Fuel tank: 17ltr.
Detergent tank: 5ltr.
Water temp.: 80C.
Dimensions (LxWxH):
607 x 688 x 1000mm.
Weight: 91kg.

Bosch Jigsaw Blades

Application: Plywood, laminated fibre wood board, plastics <30mm, blockboard & glass fibre reinfroced plastic <15mm. Taper ground teeth. Effective length: 75mm. Pitch: 2.5.

Flexible Back Bi-Metal For Wood & Plastics (Pack 5)

York? Depressed Centre Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable grinders/cut-off machines. Not to be used for ?free hand? cutting and importantly not to be used for grinding.

Depressed Centre Cutting Discs - Type 42

Grade A30/A24. For general-purpose use on metals.

3M Aluminium Zirconia Fibre Discs

581C
A fit for purpose fibre disc for heavy, medium and light grinding applications. Good performance and a consistent quality finish. High performance alumina zirconia (AZ) mineral bonded to a vulcanized fibre backing. Conveniently packaged with 50 discs on a re-usable disc-holder clamping system, for easy storage and retention of disc shape and form. Good performance on stainless and mild steel as well as other ferrous and non-ferrous materials. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

Electrical Cable

Plain annealed flexible copper conductors with low temperature, PVC insulation, low temperature PVC outer sheath.

Available in a choice of diameters and lengths.


3 Core Electrical Cable

York? Abrasives Pre-Finish & Polishing Compounds

York? Abrasives have a compound bar for every polishing job! They are manufactured using the finest quality ingredients to ensure that you get the highest quality results every time on all metals, plastics and glass. They are excellent high performance polishing compounds, not too waxy and not too dry.

For the full range of York? Abrasives polishing mops and compounds please refer to our catalogue.

General-Purpose Polishing Compound Bar

High quality ingredients combine to produce this bar for rapid working to give a mirror finish on non-ferrous metals and plastics. Dimensions: 60 x 222 x 58mm (HxWxD). Average weight: 1kg.

36v LXT SDS Combi Hammer Drill

These 36V cordless combination hammers feature compatability with both Makita 36V - 2.6Ah Li-Ion battery BL3626 and
36V - 2.2Ah Li-Ion battery BL3622A. Electric brake, variable speed control and trigger torque limiter. 40 different bit-angle settings. Vibration absorbing handle. LED job light with preglow and afterglow functions. Three mode operation - rotation + hammering, rotation only and hammering only.

Specifications:
Battery type: lithium-ion.
Battery: 2.6 Ah.
Charging time: 22 min.
Voltage: 36V.
Operation modes: RO/RH/HO.
Maximum drilling capacities:
masonry 26mm, steel 13mm, wood 32mm.
Impacts per minute: 0 - 4800ipm.
No load speed: 0 - 1200rpm.

BHR262Z 36V LXT Rotary Hammer Drill Body Only

York? Fibre Discs

Aluminium Oxide general-purpose grade resin fibre backed, sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure York sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

100mm Diameter x 16mm Bore (Max 12,400rpm)