Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 41 Chop Saw Metal A30T Cutting

For steel. Designed for low power electric table and fixed machines (80 m/s). Maximum safety due to 2 reinforcements. Quick and free cutting. High stability and long wheel life. Made of corundum. Box quantity 10.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Kennedy® TQ3 Infrared Heater Spares

Replacement Element for Kennedy TQ3 Infrared Heater.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A36. Grade: RA80. Diameter: 40mm. Length: 10mm. Max. rpm: 23,000. Weight per 10: 230g.

3M Sanding Sponges

3M Sanding Sponges offer a variety of grades and flexibilities for contour sanding on woods and lacquers.

Hi-Flex Sponge - 96 x 123 x 12.5mm

The Hi-Flex sponge is coated on two sides and is very flexible as well as durable. Available in Fine or Medium grit.

Wet/Dry Vacuum Cleaner - 1000W

Commercial wet and dry use vacuums, full plastic construction. Swing handle supplied with comprehensive accessory kit.

WV470 - 27ltr

Suction: 2100mm. Capacity Dry/Wet: 27/20 litres. Cleaning Range: 23.2m. Size: 358 x 450 x 700mm

Impact Wrench

14.4V impact wrench that features a 1/2 " square drive, perfect for hard nut applications on Hex heads, bolt tightening, fitting anchors in stone or brick and clamping pipes or wood together. Ball socket retention to allow for easy exchange and removal of nuts.

No Load speed: 2800rpm
Impact rate: 3200rpm
Bolt range: M4-M16
Toolholder: 1/2 " Sq. drive
Battery capacity: 1.3Ah
Weight: 1.9kg

Engis Hyprez Five Star Diamond Compounds

Hyprez Fivestar combined formula compound provides the unsurpassed cutting capability of natural diamond with the impact resistance of manufactured diamond. Formulated to withstand severe lapping conditions, the use of a stable carrier ensures sustained particle suspension throughout the process and an even surface coverage improving impregnation of laps. Suitable for use with Hyprez type OS (Oil Soluble) or Type W (Water Soluble) lubricants to meet specific requirements of material and surface finish. The Hyplicator dispensing syringe allows a precisely measured amount of compound to be applied, preventing contamination and wastage.

Rapid Stock Removal

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Indoor Use

With the introduction of a new EEC Directive, safety in the work place is paramount. Fitting one of Vulcascot’s cable protect or systems is not just good sense, it is a priority for caring employers who consider staff well-being. UV stabilised for extended life. Produced from a fire retardant compound conforming to BS476 Part 7 Class 3, and its European equivalent DIN 4102 Part 1 and Class B1.

Colour: black
(not illustrated).
9.0m coil length.