Kobe? 115mm (4.5??) Angle Grinder

GA1211L
Suitable for grinding, cutting-off and sanding, safety lever throttle. Supplied with auxiliary side handle, flexible backing pad, flanges & spanners,

1/4" NPT air inlet thread for 10mm air hose.
115 x 3 x 22mm cut off disc.
90PSI air pressure
6CFM* air consumption.
M10 x 1.5mm spindle thread.
Overall length of 240mm.

*Based on a 15 second cycle per minute average use.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Osaki™ Power Tools

The IDH013 is a variable speed reversible impact drill from Osaki™; that has a powerful 1,050W motor with a heavy-duty two speed gearbox, that switches easily from rotary to impact action.

IDH013 13mm Impact drill 230V

Specifications:
Motor input capacity: 1050W.
Motor supply voltage: 230V-240V/50Hz.
No load speed: 0-1100 & 0-3000RPM.
Chuck size: 13mm (1/2").
Drilling capacities: steel 13mm/concrete 16mm /wood 30mm.
Vibration level: 0.3m/s2.
Sound level: 93dB(A).
Sound power: 104dB(A).
Protection class: IP20.
Overall size: 360x260x100mm (HxWxD).
Weight: 3.4kg.

Supplied complete with chuck key, locking side handle and depth stop.

FOR DIY USE, Not Warranted for Industrial Use.

Velcro Backed Sanding Discs

No spanners required. 100% of disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied. Silicon carbide abrasive epecially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes. Can be used wet or dry.



50mm (2"). Pack 25

Trend Router Cutters

For drilling slotting, cutting aluminum anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes.

Single Flute Helical

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 15mm Height 12,300 MOS (rpm)

Bosch 7?? Professional Angle Grinder

The GWS 22-180H has been designed with a powerful Bosch Champion 2200w motor to help you power through grinding or cutting jobs. Armoured coils protect the motor against sharp grinding dust to ensure a long lifetime. Double-sealed ball bearings, and the especially sturdy gearing guarantee a long lifetime. To protect you - restart protection prevents the tool from automatically restarting after a power cut and the soft-start function ensures no damage is done to the work-piece and protects you from initial high power surge. In the event of a broken grinding disc, the broken-disc-proof guard has sufficient mechanical strength to prevent the shards from being ejected towards the user. This means the guard rotates less than 90.

GWS 22-180H 7" Angle Grinder

Specifications:
Rated power input: 2200W.
No load speed: 8500rpm.
Spindle thread: M14.
Disc diameter: 180mm.
Weight: 5kg.
Accessories: protective guard, backing flange, locking nut, two-hole spanner & auxiliary handle. (Bosch SDS quick-locking nut available separately).

Available in 240V and 110V.

Kennedy® Velcro Backed Delta Sheets

Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

6 Hole

Size: 88 x 93mm. 6 Hole Delta Dust. Extraction Type.

Kennedy® Tie Cord Bonnet Support Pads

High quality 23mm foam pads with rigid back plates. For use with all tie cord bonnets. Bonnets supplied separately. Max 2500rpm. (125mm and 150mm pads are dual purpose - also for use with Velcro bonnets or foams).

Bonnet diameters available: 125mm, 150mm, 180mm, and 200/225mm.
Thread sizes: M14 x 2 and 5/8" UNC.

Senator® Aluminium Oxide Cloth

Senator® Aluminium Oxide 'X weight' cloth rolls are an extra durable abrasive that delivers a consistent finish, ideal for maintenance and general workshop applications. Available in 46 metre rolls that allow you to cut them to the length you require suitable for hand or machine use.

Aluminium Oxide Cloth Rolls

Roll size (W)25mm x (L)46 Metres. Available in several grades.