Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Hitachi Li-Ion Batteries

Much higher capacity than even NiMH. Charge loss during storage is less than half that of NiCad. No memory at all, no periodic conditioning is needed.

EBM1830 Battery 18V 3.0Ah Li-Ion

Charger compatibility: UC18YRL/J0 and UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

Kennedy Portable Task Light Bulbs

Bulb only. Energy saving 28W 2D fluorescent bulb that generates the same as halogen but using far less energy. For use with the Kennedy Portable Task Light illustrated (KEN-282-4100K/4120K)

Kennedy® Flexible Backing Pads For 'Velcro' Sanding Discs

Suitable for use with Kennedy® 'Velcro-backed' sanding discs.

Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

Surface Conditioning Discs

Reinforced Scotch-Brite web designed for cleaning and finishing on all metals. Leaves a burr-free surface for painting and coating for removal of light rust, oxides and coatings.
Maximum rpm.25mm Discs = 25000rpm.
50mm Discs = 23000rpm.
75mm Discs = 18000rpm.

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



20mm Wide x 520mm Long.