York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Flexovit Grinding Wheels

WA: Pure and refined aluminium oxide with good cool cutting characteristics and a good speed of cut. For high speed steels, precision grinding operations and general surface grinding.

Type 1, Plain

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

NiMH Batteries - O-Type

2607335692 12.0V 3.0Ah GML24V/VCD, AL2422DC, AL2425DC, AL2450DV. AL2498FC

York? Fibre Discs

The Zirconia grain is supported by grinding additives which lubricate and cool the area being ground and help prevent clogging, prolonging the effective life of the disc. Suitable for use on all types of stainless steels, weld seams castings and other sophisticated metals for extended periods, removing large amounts of metal without excess heat build up. Available in a choice of grades and in diameters of 115mm or 178mm.

115mm Diameter x 22mm Bore (Max 13,300rpm)

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Rolls

Roll size: (W)25mm x (L)50 Metres. Available in several grades.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Pointed Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Random Orbital Sander - 150mm Elite Series

28516
eatures an alloy steel curved-throttle lever with built-in wrist support, 3M™ gripping material molded into the interchangeable comfort grip, conveniently located speed control dial, and internal muffler.
Precision balanced for smooth operation.
Takes dust management to the next level with powerful self-generated vacuum tools.
Features 3M™ proprietary clean sanding system with improved filter bag.
Newly designed wrist rest for more support.
Recessed level eliminates pinch points.
Composite cover to prevent crack housings.
Improved access to air fittings.
Improved dust collection port.
3M™ Hookit™ Clean Sanding Disc Pad, Filter Bag Adaptor and Clean Sanding Filter Bag included.
Specifications:
Airflow Rate SCFM (LPM): 17 (481).
Dimensions (H x L): 92.6 x 245mm.
Max OPM: 10000.
Max RPM:12000.
Motor: 0.28hp.
Orbit dia.: 3/16" (5mm).
Tool dia.: 6" (152mm).
Weight: 0.904kg.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Mini-Cutter Kits

Mini-Cutter kits are supplied in a handy plastic case complete with arbor, pilot and hexagon key.