Kennedy® Polishing

Wool & Acrylic mix for gentle polishing.

Super Buffing Pads

Air Tool Chisels with 0.401" Shank

For All Brands of Portable Air Chisels including CP, Desoutter, Kobe, Toku and YK.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Straight Shank Suitable for Fein, Wolf and Kress. HCS - Medium Duty (Pack 5)

Capacities: Wood - 60mm, Plastic - 50mm. Tooth pitch: 4.0. Effective length: 75mm. For cutting curves. Side set teeth. Equivalent to Wolf 91482.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

361F Cloth Discs

Tough resin bonded aluminium oxide disc for grinding and stock removal. Applications such as weld grinding and finishing.
Maximum rpm. 25mm Discs = 25000 rpm.
38,50 & 75mm Discs = 20000 rpm.

York? Non Woven Abrasive Roll

Non-woven roll for cleaning, blending and finishing applications.

Green - Fine

Size: 100mm x 10m.

Random Orbital Sander - 150mm Elite Series

28509
Features an alloy steel curved-throttle lever with built-in wrist support, 3M™ gripping material molded into the interchangeable comfort grip, conveniently located speed control dial, and internal muffler.
Benefits and features:
Precision balanced for smooth operation.
Easily attaches to your existing central vacuum system for efficient dust evacuation.
Newly designed wrist rest for more support.
Recessed level eliminates pinch points.
Composite cover to prevent crack housings.
Airflow Rate SCFM (LPM): 17 (481).
Dimensions (H x L): 92.6 x 238mm.
Max RPM: 12000.
Motor: 0.28hp.
Orbit dia.: 3/32" (2.5mm).
Tool dia.: 6" (152mm).
Weight: 0.869kg.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

240V "Vario-Line" Cable Reels

Easy to wind and rewind, with ergonomic handle for both carrying and hanging. Twin feet ensure excellent stability. Triple socket outlet. Maximum capacity 2400W, 10A. 1.0mm2 core.