Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



25mm (1") Wide x 1065mm (42") Long.

3M Abrasive Utility Cloths and Sheets

314D
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Round Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kobe? Air Grinders

The Kobe? GD2206L Air Die Grinder is supplied with a 10 piece mounted point set in a plastic carry case.

GD2206L Straight Die Grinder Kit

Specification of the Kobe? GD2206L die grinder:

Free speed: 22,000rpm.
Collet size: 3 and 6mm.
Air inlet thread: 1/4? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 4CFM*.
Noise level: 93dB(A).
Sound power level: 103dB(A).
Vibration: 5.4m/s.
Overall length: 170mm.

*Based on a 15 second cycle per minute average use.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

40mm Dia x 30mm Height 15,300 MOS (rpm)

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B105. Grade: RA120. Diameter: 6mm. Length: 6mm. Max. rpm: 100,000. Weight per 10: 20g.

Kennedy® Bench Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Single Grit Aluminium Oxide

For workshop use. Ideal for sharpening chisels, plain iron and virtually any metallic implements. Available in two types.

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein OT Semi-hard Aluminium Oxide.

Oil filled, this stone is designed to minimise loading. Length 150mm.