York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

Bosch GEX150AC Random Orbital Sander

The random orbit motion plus rotation ensures the finest sanding with high sanding performance. Aluminium bearing flange for long lifetime and high running smoothness.
Control Electronic and speed pre-selection, i.e. the right speed for every application. Sanding plate brake prevents damage (scoring) on workpiece. Bosch Micro-filter System: perfect mobile extraction. Velcro-type fastening for rapid, convenient sanding sheet changes. For sanding and polishing wood, metal and plastic, paint and varnish, even on curved surfaces. Also suitable for left handers.

Specification:
Sanding plate diameter: 150mm.
No-load speed: 4.500-12.000rpm.
Orbital stroke rate: 9.000-24.000rpm.
Eccentricity: 2,00mm.
Sanding sheet/disc attachment: Velcro-type fastening.
Rated power input: 340W.
Weight: 2.1kg.
Oscillating circuit diameter: 4.
Total shipping weight: 3kg.

Bosch GEX150AC Random Orbital Sander 110V

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

NiCad Batteries - Flat

2607335151 12.0V 2.0Ah GML24V/VCD, AL2422DC, AL2425DV, AL2450DV, AL2498FC

Chrome Plate Switch

Polished chrome 1 gang, 2 way switch rated at 10A. British Made.

Vario Optimum Drill/Mill Tilting Head - Variable Speed

BF20 Vario
Extremely stable drilling-milling machine for a precise, fast and secure fabrication. Infinite drive with electronic regulation and digital sleeve travel indicator included. Digital Quill travel indicator, precision of reading 0.01mm, mm/inch conversion.



Features:
Sturdy and precision dovetail slide way with adjustable tapered gibs. Infinitely variable drive with electronic regulation. Dynamic regulation of revolutions from 100 to 3,000rpm. Easy and clear operation thanks to individually adjustable control panel. Automatic off-switch for easy operation, with under voltage circuit breaker, right-left hand rotation. Cam controlled. Infinitely variable speed adjustment. Digital sleeve travel indicator, precision of reading 0.01mm. Positive clamping of the spindle sleeve in the drill head. Integrated work table, table illumination. High concentricity precision 0.01mm measured in the spindle sleeve. Expanding bellows as guide protection. Two stage gear transmission making excessive motor power unnecessary. D.C. motor with permanent speed monitoring. The drill head can be swivelled plus/minus 90 thus permitting milling and drilling operations in any angular position. Fine crossfeed of spindle sleeve when milling. Spindle sleeve feed via stargrip (drilling). Upright can be displaced laterally to enable longer travels and centred machining of the work piece on the cross table even when the head has been swivelled. Adjustable end stops. Feed spindles can be adjusted without clearance thanks to adjustable spindle nuts.

Specifications:
Drilling capacity (max): 16mm.
Milling cap. of inserted tooth cutter (max): 63mm.
Milling cap. of end mill cutter (max): 20mm.
Throat depth: 185mm.
Spindle holding fixture: 2MT/M10.
Spindle speeds: 100-3000rpm.
Spindle travel: 50mm.
T slot size: 12mm.
Table size: 500x180mm.
Z Travel: 280mm.
Y Travel: 175mm.
X Travel: 280mm.
Motor: 50Hz 850W.
Dimensions (LxWxH): 670x550x860mm.
Net weight: 103kgs.

Standard Accessories
Drawbar M10.
Work table illumination.
Digital sleeve travel indicator.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Router Cutters

With Ball Bearing Guide. To trim laminate producing a bevelled edge. With ball bearing guide suitable for straight or shaped work.

Bevel Edge Trimming Bits

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 10mm Height 12,300 MOS (rpm)

Norton Abrasives

Advanced grain and bond system for longer life and quicker cutting. Suitable for steel and stainless steel applications. Free from iron, sulphur and chloride. For use with portable angle grinders. Type 42 (depressed centre).

Type 42 Cut Off Discs