Outdoor Use

Specifically designed to resist the harsh environmental conditions of outdoor use. Suitable for all types of industry. Type F is also available with Department of Transport certification for across road applications in conjunction with temporary traffic signals. Designed to protect dangerous heavy duty cables.
Conform to BS476 Part 7 Class 3, which is equivalent to the European DIN 4102 Part 1 and Class B1.
Type F = 9.0m coil length.
Type FF and FFF = 4.5m coil length.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez E.D.M. Hard/Aluminium Oxide

Rectangle. Specially formulated for EDM scale removal. Length: 150mm.

SIP Professional proTECH Direct Drive Compressors

Professional direct drive compressors for tough use. Two year warranty on all proTECH compressors. A range of innovative compressors delivering quality, reliability and safety. All models are compact and highly portable making them ideal for outdoor use. Larger than normal gauges ensure ease of reading and the ergonomic pressure reducer knobs have handy snap-to" adjustment.

06256 110 Airmate OL197/10RC

Specifications:
Oil-free. 1.5HP motor, 110V supply.
10 litre air receiver.
Ideal for nailer/staplers.
Piston displacement 8.0CFM, maximum pressure 10 bar.

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Norton? Aluminium Oxide Rolls

In a useful dispensing pack with a perforated edge to facilitate cutting to required size, these high quality aluminium oxide rolls are ideal for a range of hand-sanding jobs where greater flexibility is required.

Rolls

Roll size: (W)25mm x (L)25 Metres. Available in several grades.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Inverted Cone

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Impact Wrench G7321

G7321
Suitable for light workshop and garage use. Twin hammer mechanism with a 4 point adjustable air (speed) forward/reverse speed regulator. Ergonomic and comfortable handle grip with vibration dampening a fixed inlet and exhaust. One finger stop/start trigger operation. Downward facing external exhaust in handle.
Square drive size: 3/8” (10mm).
Free speed: 10,100rpm.
Forward:
position 1: 8,000rpm,
position 2: 9,100rpm,
position 3: 10,100rpm.
Reverse:
10,200rpm.
Maximum torque: 393Nm (290ft/lbs).
Working torque: 339Nm (250ft/lbs).
Recommended air pressure: 6.2bar (90psi).
Air consumption: 3.4cfm*
Air inlet thread: 1/4” NPT.
Minimum air hose size (ID): 10mm (3/8”).
Overall length: 160mm.

Rotabroach SRC Standard Cutters

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4" pilot bore and can be used in most magnetic drills. 700 N/mm2 material hardness. Fully ground M2 high speed steel cutters.

235mm Circular Saw

Blade Diameter: 235mm. Bore Diameter: 30mm. No Load Speed: 5000rpm. Input Wattage: 2,000W. Max. Cut at 90°: 86mm. Max. Cut at 45°: 65mm. Weight: 6.8kg. Accessories include: TCT saw blade, guide and box spanner. Available in 110V and 240V.

C9U2

Canning-Lippert Preparation Mops

Stapol 100% sisal mops with cotton interleaving. Used for heavy duty mopping operations on steel and non-ferrous metals. Also used for removing grinding marks left from previous abrasive operations. Available untreated or in 3 grades of treated mops - simpol, orange and blue, all increasing in hardness and composition retention respectively. Orange and blue treatment available on request.

Stapol Untreated

Product Number: 0401-169. Diameter: 8". Width: 1". No. of Sections: 2. Weight: 350g.