Canning-Lippert "Crown 65" Mops Medium Hardness

White Felt blended and milled from high grade wool. Durable uniform texture made in three densities: hard and medium for firmness and soft for flexibility. Recommended for wet processes, i.e. glass polishing, etc. Specially made under strictly controlled manufacturing conditions. Can be used with 0704-254 steel arbor.

Small Diameter

Product Number: 0621-016. Diameter: 1". Width: 1". Weight: 10g.

York? Depressed Centre Grinding Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ?free hand? or wet grinding. Optimum angle for use 25 to 35.

Type 27

Grade R30. For use on stainless steel.

Dronco Diamond Cutting Blades

Dry or wet cutting diamond disc which is a laser-welded all-purpose segmented disc designed to cut construction-site materials. For use on concrete, exposed aggregate concrete, border stones.

LT46 Diamond Cutting Discs

Electric Pencil

Used to etch metal for easy identification. Six settings allow use on softer metals without damaging the workpiece. Needles are made from a special heat resisting tungsten alloy to retain sharpness and avoid welding to the workpiece. Settings: Alter the position of the contact plugs on the transformer to change the depth of the etching.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T101D)
Application: wood 60mm, plastics 30mm.
Blade: HCS medium duty, tapered and ground.
Tooth pitch: 4.0mm.

Effective length: 75mm.

Pack of 5.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 30mm Height 10,200 MOS (rpm)

Quantum Vitrified Bond Mounted Points

Quantum - Ceramic Abrasive Grain
Ideal for high volume foundry operations. Minimal loading and heat build up. Up to 33% longer abrasive life when compared to other ceramic abrasive products with 30% higher metal removal rates. Optimised for all low, medium and high force applications including grinding Inconel and similar alloy turbine blade components.

Kennedy® Flexible Backing Pads

Suitable for use with all portable and air disc sanders. Recommended for use with Kennedy® abrasive discs.

Chicago Pneumatic? 10mm (3/8??) Pistol Air Drill

RP9285
10mm (3/8") industrial capacity chuck with direct exhaust from the operator workpiece - very versatile. Suitable for many applications with good productivity and durability.
No load speed: 2.900rpm.
Chuck capacity: 10mm (3/8").
Maximum torque: 5.3Nm (3.91 ft-lbs).
Noise level: 89dB(A).
Vibration: 2.5m/s2.
Length: 165mm (6.5").
Weight: 1.1kg.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)50mm x (L)50 Metres. Available in several grades.