Bosch Planer

Bosch's GHO 26-82 planer is a handy tool with lots of power! It?s a small machine with a powerful 710W motor for all on-site fitting work. It has the fastest and least expensive blade changes on the market due to durable Woodrazor blades and the easiest possible adjustment. The view of the work piece is unimpaired as chip clearance can be directed to the left or right, as required.

Features:
3 V-grooves for easy and flexible chamfering.
Workpiece is protected thanks to parking rest.
Lock-on switch for left-handers and right-handers.

GHO 26-82 Planer

GHO 26-82 Specification:
Rated power input: 710W
Power output: 400W
Adjustable chip thickness: 0-2.6 mm
Adjustable rebating depth: 0-9mm
No-load speed: 16,500rpm
Length: 284mm
Width: 163mm
Height: 173mm
Planing width: 82mm
Weight without cable: 2.6kg.

Available as:
110V Order code: BCH-266-7400E.
240V Order code: BCH-266-7400F.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

Star Replacement Filter

To suit: STA 259 1100C

Kennedy® 3 Pin Quick Connect Plugs

70% faster to assemble than screw terminal plugs. Fully dust and weatherproof, safe in most environments. Easy release & turn housing for fast connection. Unique screwless terminals offer fast, tool free operation. Just push down the contact slide to connect wire to terminal. Cord grip operates automatically when housing is assembled. Self cleaning corrosion resistant nickel contacts. Corrosion-free spring. Increased copper contact guarantees better conductivity and lower temperature rise. IP44 rating. Complies with BS4343 and IEC309.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

Kobe 180mm (7") Heavy-Duty Angle Grinder

GA1807L
Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard.

Specifications:
Free speed: 7000rpm.
Grinding disc size: 180x6.3x22.2mm.
Air inlet thread: 1/4?? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 6,1/2 CFM*
Overall length: 340mm.
Weight: 3.6kg.
Sound power level: 109dB(A).
Sound Pressure/ Noise level: 103dB(A).
Vibration level: 2.6m/s.

*Based on a 15 second cycle per minute average use.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 27 General Purpose Metal A30R Grinding

For steel/stainless steel. Fast material removal. General-purpose applications. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 10.

Engis Felt Sticks

Available in 3 sizes:
6 x 100mm.
10 x 100mm.
12 x 100mm.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Glass Fibre Backed (General-Purpose - Non-Scratch)

180mm Dia x 22mm Bore 8,600 MOS (rpm).