York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical-End Cutting

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes Twisted Knot - Threaded Bore

For fast and heavy duty cleaning. The support ring prevents excessive spreading. For removal of rust, paint and scale on large surfaces. 50 SWG

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein EDM Hard/Aluminium Oxide.

Specially formulated for EDM scale removal. Length 150mm.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Circular Brushes - Plain Bore

Suitable for removal of rust, paint and dirt from heavily covered parts. Side plates supplied separately.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 27 General Purpose Metal A30R Grinding

For steel/stainless steel. Fast material removal. General-purpose applications. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 10.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Speed Ratches

SR375
Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work.

Specifications:
10mm bolt capacity.
1/4" NPT air inlet thread for 10mm air hose.
150rpm free speed.
90psi air pressure.
4CFM* air consumption.
50ft/lbs torque.
Front exhaust
Overall length: 255mm.

*Based on a 15 second cycle per minute average use.

Kobe Air Ratchet Speed Wrench (3/8?? Square Drive)

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 500A. 5 Hole

Diameter: 125mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W216. Grade: RA46. Diameter: 22mm. Length: 3mm. Max. rpm: 43,000. Weight per 10: 60g.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10's 6's. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 50mm Height 7,700 MOS (rpm)