Bosch® SDS-Plus Rotary Hammer Drills

GBH2-28DFV
The new active vibration control system gives the lowest vibration level of any 2kg at 11m/s2 for greater comfort and greater productivity. Comes with quick change chuck and delivered in the Bosch L-BOXX intelligent storage solution.

Power input: 850W.
Max. impact energy: 3.2J.
Impact rate speed: 0-5,100bpm.
Rated speed: 0-1300rpm.
Weight: 3.1kg.
Toolholder: SDS-plus.
Drilling diameter in concrete with hammer drill bits 4-28mm.
Optimum range of applications in concrete with hammer drill bits 8-16mm.
Max. drilling dia: in masonry with core cutters 68mm, in steel 13mm, in wood 30mm.

Avauialble in 110V and 240V.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)38mm x (L)50 Metres. Available in several grades.

Ajax Belt Grinders

Ajax Arboga Belt Grinders are designed for continuous heavy-duty grinding.The machines are built to a high quality and strong design. The equipment is fitted with adjustable tool rest, eye shield and motor protection.

These heavy-duty machines run at noise levels of below 80dBA. The design enables quick belt change and alignment, a flat guarded grinding area and a pivoting eye shield. For full details please contact your local branch.

Standard features
Emergency stop switch.
Adjustable eye shield.
Adjustable tool rest.
No volt release.
Large grinding area.
Prepared for dust extraction.
5 year motor guarantee.
No load speed: 28rpm (30m/sec).
Contact wheel diameter: 200mm.
Model designated ?X? have dust extraction included.
Available with optional items:
2 speed motor, cyclone dust extraction filter, increased hp, varying hardness of contact wheels.

Arboga Belt Grinders

Model Number: Ajax 75
Dust Extraction: No
Motor Rating: 4.1hp
Belt Size: 75x2000mm
Weight: 139kg

Kobe Drill Sets

This two piece drill set from Kobe contains:

A tungsten carbide tipped tile and glass drill bit for drilling through glass, tiles, mirrors and ceramics. Suitable for use with most hand held power drills, operates in rotary mode only with hammer action switched off. Use water to cool the drill tip.

A tungsten carbide tipped masonry drill bit for prolonged life and heavy-duty use, with a flute design for fast and effective waste removal.

Tile and Masonry Drill Bit Set

Available in a range of diameters:
5.00mm Order Code: KBE-280-7500K.
6.00mm Order Code: KBE-280-7510K.
6.50mm Order Code: KBE-280-7520K.
7.00mm Order Code: KBE-280-7530K.
8.00mm Order Code: KBE-280-7540K.

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein DF Medium/Soft Aluminium Oxide

This is a popular fast-cutting stone which does not load easily. Good for all dies and moulds. Length 100mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B61. Grade: RA80. Diameter: 19mm. Length: 8mm. Max. rpm: 38,000. Weight per 10: 70g.

Wet/Dry Vacuum Cleaner - Heavy Duty - 2000W

Overfill cut off valve. Dry filter system. Unique multi-purpose handle/ emptying system for easy liquid waste disposal.

WVD 902

Suction: 2200mm. Capacity Dry/Wet: 40/30 litres. Cleaning Range: 31.8m. Size: 720 x 490 x 880mm

Makita Batteries for Cordless Tools

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

NiMh Batteries - ?Plug-In? Type

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Portable Sander Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



100mm (4") Wide x 610mm (24") Long.