Kennedy® Flexible Backing Pads

Suitable for use with all portable and air disc sanders. Recommended for use with Kennedy® abrasive discs.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

Wet & Dry Vacuum Cleaner

Achieving superior suction power in a compact and flexible solution. A perfect solution for craftsmen on the move.
Working sound level: 59dB(A).
Airflow: 3700ltr/min.
Vacuum: 250mbar.
Cable length: 7.5m.
Weight: 10kg.

ATTIX30

With Push&Clean, to clean the filter, block the inlet fitting or the hose, and push and release the filter cleaning button. Powerful air pulses clean the filter and you are back to work in no time.

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

Quantum Vitrified Bond Mounted Points

Quantum - Ceramic Abrasive Grain
Ideal for high volume foundry operations. Minimal loading and heat build up. Up to 33% longer abrasive life when compared to other ceramic abrasive products with 30% higher metal removal rates. Optimised for all low, medium and high force applications including grinding Inconel and similar alloy turbine blade components.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 600A. 6 Hole.

Diameter: 150mm.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Plain (no hole)

Diameter: 150mm.

185mm Circular Saw

Circular saw featuring RAGE technology, it easily cuts steel, aluminium and wood with the same blade with virtually no burr or sparks. When cutting steel, the RAGE cuts cold, no coolant is required so the material can be handled and worked on immediately. The combination of a Hi-torque motor and gearbox, heavy duty construction and ultra high grade TCT blade enables this saw to cut materials which simply weren't possible before. A blade can cut up to 50 metres of 6mm mild steel before a replacement is required. This is a truly innovative product breaking new ground in the power tool market. Saw is supplied complete with Rage blade, ear and eye protection and carry case. Specifications: Motor: 1050W. Speed: 3500rpm. Max depth of cut 90/45: 54mm/35mm. Max cut through solid steel: 6mm. Blade: 185mm x 20mm, 20 TPI. Weight 5.5kg. Overall size: 280 x 395 x 450mm (HxWxL).

Rage 1

Hitachi Li-Ion Batteries

Much higher capacity than even NiMH. Charge loss during storage is less than half that of NiCad. No memory at all, no periodic conditioning is needed.

BSL1430 14.4V 3.0Ah Li-Ion Slide Battery

Charger compatibility: UC18YRSL(H0) and UC24YFB.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.