Engis Bobs

Spindle diameter: 1/8" except* 1/4". 3mm shank available on request.

Hardwood Bob

Highly-compressed hard wood laminated in layers with plastic. The grain direction is perpendicular to the circumference to assure uniform lapping surface and efficient charging. They are recommended for fast stock removal or where exact contour or shaping is required.

Osaki™ Reciprocating Saw - 600W - 240V

Four positional blade for working in tight or awkward spots. Ideal for both home and workshop use, for cutting and trimming numerous materials including hard and soft woods, alloys, non-ferrous metals, plastics, PVC and plasterboard. Very versatile in that it can be used right-side-up or upside-down which makes them handier than circular saws. Supplied with three blades and carry case. 1 year guarantee.

Specifications:
Power input: 600W.
Voltage: 240V/50HZ.
Weight: 5.8kg
No load speed: 700 -2300rpm.
Maximum cutting capacity: 150mm.

FOR DIY USE
Not Warranted for Industrial Use

RS600

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Yellow Line - Coarse

Ripping blades, designed with a low TPI. suitable for cutting long grain solid wood.

York? Fibre Discs

Aluminium Oxide general-purpose grade resin fibre backed, sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure York sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

100mm Diameter x 16mm Bore (Max 12,400rpm)

Hitachi NiMh Batteries

Much higher potential capacity than NiCad. Require less conditioning than NiCad. Less toxic than NiCad.

EB2433X Battery 24V 3.3AH Super NiMH

Charger compatibility: UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Yellow Line - Coarse

Ripping blades, designed with a low TPI. suitable for cutting long grain solid wood.

Hitachi 18V Impact Driver

Charge time: 60min.
No-load speed: 0-2600/min.
Maximum torque: 145Nm.
Capacity (bolt): M6-M14.
Overall length: 166mm.
Weight: kg.

WH18DSAL/JV 18V Impact Driver with 1x 4.0AH Li-Ion Battery

DeWalt DCF880N-XJ 18V XR LI IONIMPACT WRENCH BARE UNIT

Latest generation 18V XR Li-Ion Compact Impact Wrench featuring NEW XR 4.0Ah Li-Ion battery technology. Ultra compact, lightweight design allows for use in confined spaces. Improved ergonomic design and rubber grip increase comfort and provide greater application control. All metal gearing for efficient power transmission and long tool life. Aluminium front housing provides greater heat dispersion increasing motor life. Intelligent trigger allowing total control over all applications. LED light with 20 second delay. Belt hook. Frameless motor.

Specifications:
Voltage: 18V.
Battery capacity: Naked*.
Bit holder: 1/2" (12.7mm).
Power output: 250W.
No load speed: 0-2300rpm.
Impacts per minute: 0-2700ipm.
Max. torque: 203Nm.
Max. bolt diameter: M16.

*Naked tool only

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

Ajax Bench Grinders and Polishers

Arboga Heavy-Duty Double-Ended Grinders & Polishers for heavy industrial use. Totally enclosed balanced motor and shaft with dust-proof sealing to high quality bearings gives many years of quiet vibration free operation.

Also available with EX16 built-in dust extraction, KU bag type dust extraction, pedestals, polishing wheels, guards and spindles, grinding belt arms, tables with coolant troughs, illuminated wheel guards. For full details please contact your local branch.

Standard features:
Emergency stop switch.
Adjustable spark arresters.
Heavy-duty eye shields.
Adjustable tool rests.
5 year warranty on motor.

Arboga Heavy Duty Double-Ended Grinders & Polishers

Model Number: E312
Motor Continuous Power: 3hp
Supply Voltage: 415V/3pH
No Load Speed: 1,400rpm
Wheel Size: 200x50x32mm
Fixing: Bench Mounted.