100mm (4") Angle Grinder

GWS 7-100
Particularly small grip circumference for safe, non-fatigue working. Good handling due to the flat gear head and switchable right or left side handle. Spindle lock for easy disc changes. Protective guard. Safety switch. Gear head can be rotated in 90 steps. Suitable for SDS quick-locking nut (special accessory). Comes with: Protective guard, 2-hole spanner, Auxiliary handle, Locking nut and Flange.

Rated power input: 720W.
No-load speed: 11.000rpm.
Grinding spindle thread: M10.
Disc diameter: 100mm.
Rubber sanding plate, diameter: 100mm.
Wire cup brush diameter: 70mm.
Weight: 1.8kg.

Available in 230V and 110V.

GWS 7-100

Makita 115mm (4 1/2 ") Mini Cordless Angle Grinder

Lithium-Ion offer longer, more powerful working with 40% less weight. Slide-type on/off switch with non start up if battery is inserted and the switch is in `on` position. Capable of using discs for AC grinders. When the unit is overloaded the overload lamp will elluminate and the motor will shut down. Battery replacement reminder. Anti-start function for safety.

Specifications:
Max disc size: 115mm (4.5").
No load speed: 10,000rpm.
Charge time: 45 minutes.
Weight: 1.9kg.
Supplied complete with fast battery charger, 2x 18V 3.0Ah Li-Ion batteries, lock nut wrench, side grip, abrasive wheel, carry case.

York? Quick Change Screw Fitting Discs

For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC? system holders.



Zirconia Alumina Abrasive Discs for grinding and finishing of stainless steel.

Kennedy® Router Cutters

With Ball Bearing Guide. To trim laminate producing a bevelled edge. With ball bearing guide suitable for straight or shaped work.

Bevel Edge Trimming Bits

York? Stitched Type Polishing Mops

These quality sisal mops are designed for heavy duty use including mopping operations on steel and non ferrous metals. They are ideal for the clearing of grinding/polishing marks from previous operations.

Untreated Sisal

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



20mm Wide x 520mm Long.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Additional Side Plates for Circular Brushes

Supplied free of charge with circular brushes. Please specify when ordering.

3M Roloc? Bristle Discs

Roloc bristle discs are ideal for removing paint, stains, adhesives, weld burns, rust, heavy oxides, and surface contaminants from large areas quickly and easily. Requiring minimal pressure from the operator and their maximum operating speed is suitable for most right angle tools.
The Roloc attachment system allows discs to be rapidly changed.

SDS-Plus Multi Purpose Drill/Hammer Kit

GBH 4-32 DFR
Impact rate: 3,600bpm.
Impact energy: 0-5J.
Capacities: concrete 32mm,
steel 13mm, wood 13mm.
Weight: 4.7kg.
240V.

Accessories:
SDS-plus quick-change chuck, keyless chuck 13mm, 4x SDS-plus drill bits: 10/12/14/16mm, point & flat chisel, 4 piece multiconstruction set (dia: 5.5, 6, 7, 8 ), progressor hole saws 20/25/51mm plus adaptor, 6 self cut flat bits (dia: 13, 16, 19, 20, 22, 25), depth stop 310mm, auxiliary handle, carry case.