Kennedy® M2 Multi-Tooth Milling Cutters

For use with Magtron broaching units, drill presses, lathes etc.

Morse Taper Adaptors

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

3/4" Very Heavy Duty Impact Ratchet

CP772H
One hand push button forward/reverse power regulator. Four positive power settings in forward and ultimate power in reverse. Teasing throttle design for precise control. Handle exhaust with 360° air inlet swivel to prevent hose kinks. Comfortable contoured handle grip reduces user fatigue. Hammer mechanism DynaPactTM clutch. Pin clutch oil bath.

Output drive: 3/4”.
Air inlet thread: 3/8” NPT.
Free speed: 4,200rpm.
Air consumption: 6.0cfm.
Air pressure: 90psi.
Standard bolt capacity: 1”.
Working torque range: 150 - 700Nm.
Max. Torque @90psi rev: 1356Nm.
Sound pressure level: 96dBA.
Vibration level: 4.9m/s2.
Overall length: 245mm.
Weight: 4.76kg.



*Based on a 15 second cycle per minute average use.

Norton Tool and Cutter Wheels

Thin slitting discs in aluminium oxide grain for all toolroom cutting-off applications. Hard grade.

Non-Reinforced Toolroom Cutting Wheels

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B121. Grade: RA120. Diameter: 13mm. Length: 13mm. Max. rpm: 45,000. Weight per 10: 50g.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

115mm x 50m AL/Ox Paper Roll P180

Available in a choice of Medium or Heavy Duty and in several grades. Roll size : 115mm x 50m.

Medium

Open coat aluminium oxide paper for wood, metal, fibreglass, paint, filler and lacquer.

SIA Fibre Discs

4819
Tough durable zirconia grain with grinding aid to reduce heat build up and glazing. Strong fibre backing to give maximum grain support on arduous applications. Excellent life and cut to reduce down time and consumable costs, ideal for mild and stainless steel applications.

Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured to the highest standards. The KD formula ensures a stable carrier is provided, which gives the fastest cutting and polishing action. Type W (water) and OS (oil) lubricants can be used to extend the life of the compound. Kemet Diamond Compound is suitable for lapping and polishing most materials including Steels, Carbides and Ceramics.

Final Polishing

Heat Gun Accessories

For soldering and for use with heat shrinkable tubing.

Reflector Nozzle