York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Glass Fibre Backed (General-Purpose - Non-Scratch)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

Canning-Lippert Climax Quality Mops (Extra Soft)

Designed specifically for use on plastics but is also suitable for gold and silver. Extremely soft cloth that is unsuitable for steel, stainless and non-ferrous metals. Open type construction for medium polishing pressure. For use with Vonax composition.



Product Number: 0209-138. Diameter: 6". Width: 2". Weight: 330g.

TGL-YCM-085

TGL-YCM-085
Adjustable left cutting angle from 0° to 45°. Blade tensioning device. Base with integrated vice. Cuts without lubrication. Powerful 850W, digital variable speed motor with noise reduction system for very quiet operation. Anti-reset safety function and ergonomic hand-grip.

Technical Data
Motor: 850W - 240V.
Blade size: 1330 x 13 x 0.65mm.
Capacity: @90° 85mm @45° 60mm.
Blade variable speed: 30 ~ 80m/min.
Dimensions (L x W x H): 680 x 290 x 480mm.
Weight: 19kg.

Bosch Jigsaw Blades

Application: Fast & coarse cuts in fibreglass-reinforced plastics 6-60mm. Cement bonded chipboard, concrete, bricks 6-80mm. Tungsten carbide tipped side set teeth. Effective length: 100mm. Pitch: 4.3.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

York? Diamond Coated Burrs

3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.

Cylindrical Ball Nosed

York? Open Type Polishing Mops

Designed to produce high quality finishes on non-ferrous metals such as brass, copper, aluminium and pewter. Can also be used on plastics for a medium finish. The open type construction is best used with medium polishing pressure. Can be used with our fast cutting and mirror finish polishing bars.

Soft

Bullett Dehumidifier

Very high quality, highly engineered specification large portable fans, for both cooling and ventilation purposes. Ideal for use as a man cooler where there are large areas of space with multi occupancy, or in conjunction with portable air conditioning equipment. Attractive impact-resistant body in tough ABS. Supplied mounted on epoxy coated tubular steel stand. Fully adjustable stand. Stepless speed controls from stationary to maximum. 230V and 110V models available. Supplied complete with 2.5m cable.

FloodBoy

Nominal, maximum extraction of 28 litres per day via advanced refrigerant circuit. Economical, consumes only about 1 amp. Runs from 240v and 110v, or 240v only supply. Rugged steel construction with 'Plastisol' covering. Fitted with electronic 'tough' hour counter as standard. Special 18mm waste pipe to prevent clogging. Removable drip tray for regular, easy cleaning. Wide fin pitch to prevent 'coil clogging' with airborne debris. Dimensions (H x W x D): 500 x 320 x 365mm. Airflow (average): 120cfm. Electricity consumption: 1.1A (at 60% R.H, 15/20C). Colour: Ocean Blue.

Makita Batteries for Cordless Tools

Charger compatibility: DC24SC, DC24WA.

NiMh Batteries - ?Slide-On? Type

Kennedy® Router Cutters

For cutting grooves/apertures and general shaping work. Single flute for maximum support behind the cutting edge, giving strength, while providing large clearance for ease of chip flow promoting fast free cutting.

Single Flute Straight Plunging Bits

Kennedy® Wet or Dry Silicon Carbide Paper

Silicon Carbide is waterproof-resin bonded to paper suitable for wet and dry production polishing and finishing of a wide range of materials including metals, plastics, paintwork, ceramics etc.

Wet or Dry Paper Sheets

Size: (W)230mm x (L)280mm. Available in several grades.