Kennedy® Tie Cord Bonnet Support Pads

High quality 23mm foam pads with rigid back plates. For use with all tie cord bonnets. Bonnets supplied separately. Max 2500rpm. (125mm and 150mm pads are dual purpose - also for use with Velcro bonnets or foams).

Bonnet diameters available: 125mm, 150mm, 180mm, and 200/225mm.
Thread sizes: M14 x 2 and 5/8" UNC.

Engis Lapping Sticks

Length 150mm.

Hardwood

Flexovit Grinding Wheels

GC: For offhand grinding of low tensile materials and non ferrous metals, also suitable for carbide tool grinding.

Type 1, Plain

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Pointed Tree

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B43. Grade: RA100. Diameter: 6mm. Length: 8mm. Max. rpm: 80,000. Weight per 10: 310g.

Cordless Variable Speed Drills

Powerful, multi-talented tool for drilling and screwdriving. Keyless chuck with Auto-Lock for the fastest and easiest tool changes, Forward/reverse operation. Torque preselection with 25 torque settings plus 1 drill setting - optimum power for every application. 1x 1.5Ah NiCd batteries with 1-hour quick charger with "battery full" detection, LED PowerLight,
Run-out brake and switch-on lock, Softgrip for a more comfortable hold. Supplied in a carrying case.

PSR14.4-2 - 14.4v Ni-Cad

No load speed: 0 - 400/1250rpm.
Max. torque: soft/hard: 22/36Nm.
Screw diameter: up to 8mm.
Drilling diameter: steel 10mm, wood 35mm.
Weight: 1.75kg.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Plain (no holes)

Diameter: 150mm.

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

180mm Dia x 22mm Bore 8,600 MOS (rpm).

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Palm Sander

Easy-to-handle, dust-free palm sander. Double insulated for safety. Includes abrasive papers (pack of 6), dust bag, punch plate and hook & loop clamp.

Specifications:
Pad size: 112 x 102mm.
Abrasive sheet: 114 x 140mm.
Orbital action: 1.5mm.
Orbits per minute: 14,000.
Weight: 1.1kg.

Available in 240V and 110V.