Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Circular Brushes Twist Knot - Plain Bore

A more aggressive circular brush. The twist knot constryction allowa a higher surface speed. 35SWG

Kobe Production Mini Belt Air Sander Kit

Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Kit includes the MBS025-X Mini Belt Sander. Supplied complete with 9 flexible abrasive belts and 5 contact arms with heavy duty nose rollers allowing the belts to conform to a variety of contours. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Quick abrasive change. Adjustable sanding arm angle. Speed regulator. Multi positional sanding arm. Rear handle exhaust with noise baffler. One handed trigger operation. Rotating air inlet to prevent the air hose from tangling. Removable side arm for use in tight areas. Easily adjustable belt tracking. Optional 25mm contact arm KBE-280-5650K.

MBS025-X Mini Belt Sander:
Specifications:
Belt size: 457mm(18??) x 6, 10, 13 & 20mm.
Free speed: 18,000rpm.
Air inlet thread: 1/4?? NPT.
Minimum air hose size (ID): 10mm (3/8??).
Air pressure: 6.2Bar (90PSI).
Motor power: 0.6hp.
Air consumption: 113Ltr/m (4CFM)*.
Sound power level: 92dB(A).
Sound pressure/noise level: 84dB(A).
Vibration level: 0.8m/s2.
Overall length: 390mm.
Net weight: 1.36kg.

Kit contents:
MBS025-X Mini Belt Sander.
Surface preparation file belts: 20mm P80 grit (coarse), 13mm P300 grit (fine).
Aluminium oxide file belts: 20mm P60 grit, 20mm P80 grit, 13mm P80 grit, 13mm P120 grit, 10mm P120 grit, 10mm P150 grit, 6mm P150 grit.
Contact arms: 6mm, 10mm, 13mm, 20mm contact arm with flat roller. 10mm contact arm with rounded roller.
4mm hexagon key L-wrench.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

DMT Diamond Whetstones

Made with real diamond (monocrystaline). Easy to use - requires only light pressure to produce a keen edge. Uses water as a lubricant. Can be used to hone and sharpen steel, ceramics, glass, tungsten carbide, stone, etc.

100mm Double Diafold Whetstones

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Flame Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

3M Roloc? Disc Products

Designed for use on portable tools and featuring the convenient Roloc? Twist-on, Twist-off fixing system.

Roloc? Disc Holders

All holders on 6mm shank.

Karcher Wet & Dry Vacuum Cleaners

A powerful spray extraction unit designed for easy, efficient deep cleaning of carpets, upholstery and textile flooring. The Puzzi 100 is an exceptional all rounder, with added features which makes using the machine even quicker and easier. This makes it a favourite amongst car dealers for valeting the interiors of
new and used vehicles. With a powerful 1 bar spray rate, the water and detergent solution is applied to the area being cleaned and picked up immediately by the vacuum nozzle. The cleaned surface can be walked on almost straight away as very little residual moisture remains. Carpets dry up to 63% faster than those cleaned with other comparable products.

Features and Benefits:
Convenient storage compartment for detergent tablets.
Separate fresh water tank with filter element enables long operating periods and protects pump from contamination.
Accessory holder on handle.
Compact shock proof, lightweight plastic housing.
2 large wheels and 2 castors for excellent manoeuvrability.
2 push buttons (spraying & vacuuming) gives the option to pre-spray, before vacuuming.
Removable dirty water tank for easy disposal of waste.

Puzzi 100 Spray Extraction Cleaner

Specifiction for the Puzzi 100:
Power supply Ph/V/Hz: 1/240/50
Max area performance: 20-25 m2/h
Air flow rate: 54 l/s
Vacuum: 220/22.0mbar/KPa
Motor capacity: 1250W
Spray pressure: 2.5bar
Working width: 330mm
Clean/Dirty water tank: 10/9ltr
Weightt: 10.3Kg
Dimensions: 665x320x435mm (L x W x H)

Felt Flap Wheels

York Felt Flap Wheels are made of pure wool in a variety of sizes and shapes. The mandrels are exactly centred for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds.

Osaki™ Metal Cut Off Saw

Designed for workshop use, this robust and powerful high speed saw slices quickly and cleanly through ferrous metal bar, tube and profile up to 200mm. Can also be used for cutting brick, stone and masonry products when fitted with an appropriate masonry disc. Includes full safety guard, quick release material clamp and carry handle. Supplied with Al-Oxide cutting wheel for metal and open ended wrench. 1 year guarantee. For DIY & hobby use.

Specifications:
Power input: 2000W.
Voltage: 240V/50Hz.
Disk size: 355 x 25.4 x 3.2mm.
Maximum cutting capacity: 115mm.
Footprint: 445mm x 245mm.
Swivelling range: 0-45°.
Vice clamping range: 0-240mm.
Saw width at 90°: 100/70 x 170mm.
Saw width at 45°: 100/70mm.
Sound pressure level LPA: 98dBA.
Sound power level LWA: 111dBA.
Dimensions: (L)600 x (D)330 x (H)430mm.
Weight: 19.6kg.

FOR DIY USE
Not warranted for Industrial Use

Kennedy® 6 Piece High Performance Router Cutter Set

Manufactured from high speed steel with tungsten carbide tips. Precision ground cutting edges for improved surface finish and longer tool life. Ideal for the production environment. All on a 1/4" shank.



Contents:
Two Flute Trimming Bit: 12.7mm diameter x 25mm cutting length with ball bearing guide.
Two Flute Straight Plunging Bit: 12mm diameter x 19mm cutting length.
Two Flute Roman Ogee Bit: 25.4mm diameter x 14.5mm cutting length x 4mm radius with ball bearing guide.
Two Flute Rounding Over Bit: 22.2mm diameter x 6.3mm radius with ball bearing guide.
Two Flute Dovetail Bit: 12.7mm diameter x 14° side cutting angle.
Two Flute "V" Grooving Bit: 12.7mm diameter x 90° inclusive cutting angle.