Cordless Impact Wrench

Powerful fan cooled motor delivers up to 440Nm of sustained torque and up to 2500 impacts per minute for heavy duty fastening applications.

Power output: 800W.
No load speed: 1,400rpm.
Bit holder: 1/2” sq.
Impacts per minute: 2500bpm.
Max. bolt diameter: M20.
Battery capacity: 2x 2.0Ah
Li-Ion Nano.
Weight: 3.4kg

York? Resin Fibre Backed Sanding Discs

Aluminium Oxide general-purpose grade resin fibre backed, sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure York sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

178mm Diameter x 22mm Bore (Max 7,000rpm)

DeWalt DCF885M2-GB 18V Impact Driver

Compact Impact Driver with XR technology, rubber-coated grip, ¼" hex tool holder, LED lights and intelligent trigger for protecting the battery. Supplied with heavy duty carry case.

2 x 4Ah Li-Ion XR batteries.
Single-speed variable & reverse.
1hr charger.
Fan-cooled motor.
All-metal gearbox.
Electric brake.
Rubber-coated grip.
¼" hex tool holder.
LED work light.

Specifications:
Bolt capacity M4-M12.
Max. torque 150Nm.
Weight 1.6kg.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

3mm Shank

30mm Dia x 10mm Height 20,400 MOS (rpm)

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T118A)
Application: steel 1.5 - 4mm, aluminium 1.5 - 4mm, plastics 8mm.
Blade: HSS heavy duty, wavy set tooth form.
Tooth pitch: 1.2mm.

Effective length: 48mm.

Pack of 5.

Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured to the highest standards. The KD formula ensures a stable carrier is provided, which gives the fastest cutting and polishing action. Type W (water) and OS (oil) lubricants can be used to extend the life of the compound. Kemet Diamond Compound is suitable for lapping and polishing most materials including Steels, Carbides and Ceramics.

Lapping & Pre-Polishing

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

DeWALT Reciprocating Saw

The DW311K reciprocating saw has a powerful 1200W motor that delivers increased power for heavy duty applications. Orbital action delivers fast cutting action in wood. Variable speed control dial matches the correct speed for the application for increased versatility and control.

Keyless stainless steel blade clamp for quick and easy blade changes and increased reliability. Keyless adjustable shoe easily adjusts depth of cut and extends the blade life.

Available as:
110v Order Code: DEW-272-3181K.
230v Order Code: DEW-272-3181R.

DW311K Reciprocating Saw

DW311K Specifications:
Power input: 1200W.
Power output: 630W.
No load stroke rate: 0-2600spm.
Stroke length: 28mm.
Max. cutting capacity
Wood: 300mm.
Steel Sections & Pipes: 130mm.
PVC: 160mm.
Weight: 4kg.

Supplied with: 1 professional bi-metal blade and heavy duty carrying case.

Wet & Dry Vacuum Cleaner

A high-performance wet and dry vac for daily industrial vacuuming of spills that can create a hazard that can prove both dangerous and costly. Ultra-reliable, the ATTIX 961-01 will go on cleaning powerfully and quickly, day-in and day-out. It has two motors for industrial performance and a washable PET Fleece, big surface filter for high efficiency and low maintenance costs. The Push & Clean filter cleaning system gives high efficiency. The stainless steel tiltable and removable 70 L container is perfect for handling and disposal. Complete package with 38mm accessories that have stainless steel tubes and a 400 mm wet & dry floor nozzle. 10 metre cable for a large working radius. Applicable for wet & dry pick up by reliable floating system. Robust fleece filter bag is standard.

Available in 230V and 110V.

Attix 961-01