Dynabrade Dynafile Mini Belt Air Sander

14000
Suitable for grinding, deburring, blending & polish sanding of wood, metal, ceramics, composites, stainless steel, plastics, fibreglass, rubber, glass & stone. Replaces tedious hand filing and sanding. Superior belt tracking and fast abrasive belt changes. New composite quick-change housing cover. Composite housing reduces vibration and is thermal-insulated. New belt housing has larger opening for belt tracking and operation. Front exhaust.

Specifications:
1/4" NPT air inlet.
4CFM at 90PSI.
Overall length: 371mm.
Belt size: 3-13mm(W) x 610mm(L).
No load speed: 20,000rpm.
Weight: 1.4kg.
Noise level: 77dB(A).

Cordless Drill/Driver

Standard duty cordless drill/driver for small to medium screw-driving and drill diameters. Supplied in L-Box.

Battery Capacity: 1.3Ah
No-load speed: 400/1300rpm
Max. drilling capacities:
steel 10mm, wood 29mm.
Max screw dia.: wood 8mm.
Weight: 1.8kg

Siawood 2921 Portable Sander Belts

Resin bond aluminium oxide sanding belts are designed
for industrial applications. Suitable for wood and
metal work.



75mm (3”) Wide x 610mm (24”) Long

Senator® Multi-Purpose 'Dial-A-Drill' Set - 18 Piece

Designed to satisfy countless tasks around the home and workshop - a drill bit for every job!. Supplied in a robust "dial a drill" case for easy selection and compact storage.

Contents:
6 x Wood Drills with "lip and spur" self centering/self starting ponts. Suitable for all types of timber. Sizes 3, 4, 5, 6, 8, 10mm.

6 x Masonry Drills with TCT drill point. Suitable for tiles, ceramics and all light building materials such as breeze-block, brick and mortar. Sizes 3, 4, 5, 6, 8, 10mm.

6 x HSS Drills (Jobber) with roll forged flutes. Suitable for use in portable powertools in all types of materials such as wood, plastics, metals and tube and sheet materials. Sizes 3, 4, 5, 6, 8, 10mm.

York? Quick Change Screw Fitting Discs

For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC? system holders.



Zirconia Alumina Abrasive Discs for grinding and finishing of stainless steel.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 27 General Purpose Metal A30R Grinding

For steel/stainless steel. Fast material removal. General-purpose applications. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 10.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 42 Depressed Centre A30T Cutting Discs

For steel/stainless steel. Fast cutting. Long wheel life. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 25.

SDS Hammer Drill

Powerful hammer drill with tool-free SDS chuck and 2 drilling modes for wood and metal drilling or masonry hammer drilling.

No Load Speed: 1500rpm
Impact rate: : 5000bpm
Drilling capacities: Concrete 16mm, Steel 13mm, Wood 24mm
Battery capacity: 3.0Ah
Weight: 2.1kg

SDS+ Hammer Drill

Heat Gun Accessories

For soldering and for use with heat
shrinkable tubing. Made from stainless
steel.

Soldering Reflector Nozzle

Hitachi Power Tool Battery Chargers

Suitable for slide-on 25.2 - 36.0V Li-Ion batteries. 60 minute charge (25.2V x 3.0Ah battery). 80 minute charge (36.0V x 2.6Ah battery).
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

UC36YRL 25.2V-36V Charger