NB160 High Performance Air Nibbler

NB160
Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Teasing throttle for precise control.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption
Cutting capacity: 1.6mm (steel) to 3.0mm (aluminium). Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

Flexovit Grinding Wheels

WA: Pure and refined aluminium oxide with good cool cutting characteristics and a good speed of cut. For high speed steels, precision grinding operations and general surface grinding.

Type 1, Plain

Ceramic Abrasive Flap Discs

'JET Ceramic' ceramic abrasive discs with intergrated M14 adaptors for quick mounting and reinforced glass fibre backing with 'cooling slots' for air-cooling. For use on steel and stainless steel.

J-AK

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

3M Aluminium Zirconia Fibre Discs

581C
A fit for purpose fibre disc for heavy, medium and light grinding applications. Good performance and a consistent quality finish. High performance alumina zirconia (AZ) mineral bonded to a vulcanized fibre backing. Conveniently packaged with 50 discs on a re-usable disc-holder clamping system, for easy storage and retention of disc shape and form. Good performance on stainless and mild steel as well as other ferrous and non-ferrous materials. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)

115mm Cordless Angle Grinder

14.4V powerful cordless angle grinder supplied complete with 22 minute battery charger, 2x 14.4V 3.0Ah Li-Ion batteries, lock nut wrench, side grip, abrasive wheel and carry case.
No load speed: 10000rpm
Battery capacity: 3.0Ah
Weight: 1.8kg

Kennedy® Velcro Backed Delta Sheets

Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

6 Hole

Size: 88 x 93mm. 6 Hole Delta Dust. Extraction Type.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Kennedy® 3 Pin Plugs for Site Use

Fitted with fully waterproof spring loaded caps. Rated to 16A over 6 hours. Colour coded: 110V yellow, 240V blue. Conform to BS 4343 : 1968.

Desoutter Air Engraving Pen

VP2X
Compact pneumatic engraving pen.

Specifications:
1/8" BSP air inlet for 3mm air hose.
Supplied with 2M air hose as standard.
90PSI air pressure.
Overall length: 148mm.