Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B132. Grade: RA80. Diameter: 10mm. Length: 13mm. Max. rpm: 45,000. Weight per 10: 50g.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Glass Fibre Backed (General-Purpose - Non-Scratch)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 27 Depressed Centre Grinding

For use with all portable angle grinders. Not to be used for wet grinding. Optimum angle for use 25° to 35°. Grade A30/AS30 - for general purpose use on metals. INOX - for use on Stainless steel (iron, chlorine and sulphur free).

Kennedy® Abrasive Files

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Round Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 25mm Height 12,300 MOS (rpm)

Norton Abrasives

Advanced grain and bond system for longer life and quicker cutting. Suitable for steel and stainless steel applications. Free from iron, sulphur and chloride. For use with portable angle grinders. Type 27 (depressed centre).

Type 27 Grinding Discs

Makita Battery Chargers for Cordless Tools

Chargers for Makita Li-Ion/NiMH/NiCD plug-in type batteries. Additional chargers used in conjunction with extra batteries also increase productivity, charging batteries while not in use. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing.

DC10WA Battery Charger

Li-Ion charger. 7.2 to 10.8V. 30 minute charge (1.0Ah battery).

165mm (6 1/2") Circular Saw

Accessories include: TCT Blade, RIP fence and blade spanner. Blade size: 165mm. Power input: 950W. Maximum cutting capacity: 90 54mm, 45 35mm.

5604R

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W205. Grade: RA36. Diameter: 20mm. Length: 25mm. Max. rpm: 34,000. Weight per 10: 280g.

York? Fibral XL Unitised Discs

Grade, size or product can be changed quickly and easily. Suitable for use with all types or portable drills, grinders, etc. Can be used as a disc or wheel.

XL Unitised Discs

Size: 50 x 6mm.