3M 260L Hookit™ Discs

Micron graded aluminum oxide resin bonded to a 3mm polyester film backing. Open coat abrasive surface is coated with a dry lubricant to resist loading. With loop backing for attachment to hook faced backing pads. Easy to re-use.

Hole Pattern: LD601A. 7 Hole.

Diameter: 150mm.

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Makita SDS Max Rotary Demolition Hammer

52mm SDS Max Rotary Demolition Hammer. Torque limiter with vibration absorbing soft grip handle.

HR5211C

Vibrations per Minute: RH 12.5 HO 11.0 with D handle
Max in Concrete: 52mm
Core Bit Diameter (TCT): Max.160mm
Joules: 19.7Js
Blows per minute: 1,075-2,150bpm
No Load Speed: 130-260rpm
Input wattage: 1,500w
Net Weight: 11.6kg

Standard Equipment:
Case, 2 x side handle assembly, depth stop.

Available in 240V and 110V.

Kobe? General Duty Air Hammer & Chisel Kit

HP5040K
Supplied with flat chisel, spot weld breaker, taper punch & rivet cutter. Variable power regulator. Accepts all standard 0.401? shank tools.

Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 135mm.
Stroke length: 40mm.

*Based on a 15 second cycle per minute average use.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 500A. 5 Hole

Diameter: 125mm.

Bosch AL3640CV 36v Li-ion Charger

AL3640CV charger for 36v lithium batteries, approx 30 minute charge time for an 80% charge, these Bosch chargers are also supplied as Bosch stock number 2607225102.

Model: AL3640CV.
EAN: 3165140365499.
Shipping weight: 1.65kg.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

Senator® 12 Piece Router Cutter Set

Manufactured from high speed steel with tungsten carbide tips. Suitable for use with all portable routing machines. Ideal for craft work, light duty and workshop use.



Contents:
Two Flute Core Box Bit: 12.7mm diameter x 6.3mm radius.
Two Flute Core Bit: 22mm diameter x 6.3mm radius with ball bearing guide.
Two Flute Dovetail Bit: 12.7mm diameter x 14° side cutting angle.
Two Flute Chamfering Bit: 32mm diameter x 45° side cutting angle with ball bearing guide.
Two Flute Flush Trimming Bit: 12.7mm diameter with ball bearing guide.
Two Flute Straight Trimming Bit: 16mm diameter x 12.4mm cutting length.
Two Flute Rounding Over Bit: 22mm diameter 6.3mm radius with ball bearing guide.
Two Flute Straight Trimming Bit: 12mm diameter x 20mm cutting length.
Two Flute Straight Trimming Bit: 6mm diameter x 19mm cutting length.
Two Flute Rounding Over Bit: 28.6mm diameter x 9.5mm radius with ball bearing guide.
Two Flute Dovetail Bit: 12.7mm diameter x 90° inclusive cutting angle.
Two Flute Roman Ogee Bit: 25mm diameter x 14.5mm.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore