Hitachi 180mm (7") Sander/Polisher 950W 2-Speed

SAT180
Powerful industrial grade 950W motor. 2-speed dust sealed switch. Sliding trigger (dead man?s handle). With spindle lock & disc guard. Supplied with side handle, rubber backing pad, wool bonnet, 5 sanding discs and 2 spanners. Power input: 950W. No load speed: 1,900/3,400rpm. Spindle: M14 x 2. Pad size: 180mm. Length: 395mm. Weight: 2.9kg.

Available in 240V and 110V.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

PCL Blow Guns

Made from die cast alloy for long trouble free life. Inlet thread 1/4" BSPT. Health and safety regulations dictate that an in-line regulator should be used to restrict pressure to 28psi.

Standard Grip

With safety nozzle.

Star Spray Gun Accessories

Includes replacement air valve, valve spring, needle spring and o-rings.

Repair Kits

Professional

Kennedy® Router Cutters

With ball bearing guide. For edge mould on coving, picture frames, etc. Self guiding with ball bearing.

Two Flute Cove Bits

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

York? Sanding Sticks

The ideal tool for those awkward finishing jobs, the spring loaded holders combine with standard sanding belts to become a simple but effective lapping tool. Available individually or in a nine piece set with suitable belts.

Sanding Sticks

York? Drum Holders

Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 30mm Height 7,700 MOS (rpm)

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Two Hole Type Suitable for old style Makita. HCS - Medium Duty (Pack 5)

Capacities: Wood - 30.0mm, Plastics 20.0mm. Tooth pitch: 2.0. Effective length: 60mm. Wavy set teeth. Equivalent to Makita No.2.