Engis Hyprez Five Star Diamond Compounds

Hyprez Fivestar combined formula compound provides the unsurpassed cutting capability of natural diamond with the impact resistance of manufactured diamond. Formulated to withstand severe lapping conditions, the use of a stable carrier ensures sustained particle suspension throughout the process and an even surface coverage improving impregnation of laps. Suitable for use with Hyprez type OS (Oil Soluble) or Type W (Water Soluble) lubricants to meet specific requirements of material and surface finish. The Hyplicator dispensing syringe allows a precisely measured amount of compound to be applied, preventing contamination and wastage.

Lubricant for use with Hyprez Five Star Diamond Compound

2.5ltr can.

100mm (4") Angle Grinder

GWS 7-100
Particularly small grip circumference for safe, non-fatigue working. Good handling due to the flat gear head and switchable right or left side handle. Spindle lock for easy disc changes. Protective guard. Safety switch. Gear head can be rotated in 90 steps. Suitable for SDS quick-locking nut (special accessory). Comes with: Protective guard, 2-hole spanner, Auxiliary handle, Locking nut and Flange.

Rated power input: 720W.
No-load speed: 11.000rpm.
Grinding spindle thread: M10.
Disc diameter: 100mm.
Rubber sanding plate, diameter: 100mm.
Wire cup brush diameter: 70mm.
Weight: 1.8kg.

Available in 230V and 110V.

GWS 7-100

Engis Hyprez Five Star Diamond Compounds

Hyprez Fivestar combined formula compound provides the unsurpassed cutting capability of natural diamond with the impact resistance of manufactured diamond. Formulated to withstand severe lapping conditions, the use of a stable carrier ensures sustained particle suspension throughout the process and an even surface coverage improving impregnation of laps. Suitable for use with Hyprez type OS (Oil Soluble) or Type W (Water Soluble) lubricants to meet specific requirements of material and surface finish. The Hyplicator dispensing syringe allows a precisely measured amount of compound to be applied, preventing contamination and wastage.

Final Polishing

13mm Rotary Drill

Electronic, variable speed with forward and reverse action. Drill spindle with hexagon socket for direct insertion of screwdriver bits. Small width across corners of 29mm. Fully ball and roller bearing-mounted.

Power output: 287W.
Power input: 500W.
Rated torque: 11,5 /- 6,0 Nm.
Chuck: 13mm Keyless.
No load speed: (1st gear) 0-550 rpm / (2nd gear) 0-1.000rpm.
Drilling range: (1st gear) Aluminium 20mm / Wood 32mm / Steel 13mm.
Drilling range: (2nd gear) Aluminium 12mm / Wood 20mm / Steel 8mm.

GBM 13-2RE

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Rolls

Roll size: (W)38mm x (L)50 Metres. Available in several grades.

Kennedy® Flexible Backing Pads For "Self-Stick" Sanding Discs

Designed for use with orbital sanders.
3 types available: 125mm disc (5 holes) and 150mm disc (no hole and 6 hole versions).
Thread size: 5/16" UNF.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

3" Bore

Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured to the highest standards. The KD formula ensures a stable carrier is provided, which gives the fastest cutting and polishing action. Type W (water) and OS (oil) lubricants can be used to extend the life of the compound. Kemet Diamond Compound is suitable for lapping and polishing most materials including Steels, Carbides and Ceramics.

Lubricant for use with Kemet Diamond Compound Base.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Plain (no holes)

Diameter: 150mm.

Chicago Pneumatic 10mm Slimline Pistol Grip Drill

CP1064
10mm (3/8") capacity chuck. High-powered pistol drill. Slim design - compact and lightweight.

Free speed: 2,500rpm.
Air inlet: 1/4” BSP/NPT.
Air consumption: 19.7cfm.
Spindle thread: 3/8” - 24f.
Chuck capacity: 10mm (3/8”).
Air hose bore: 10mm 3/8”.
Noise level: 83dBA.
Vibration level: <2.5m/s2.
Overall length: 225mm.
Weight: 0.70kg.