Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Norton? Aluminium Oxide Rolls

In a useful dispensing pack with a perforated edge to facilitate cutting to required size, these high quality aluminium oxide rolls are ideal for a range of hand-sanding jobs where greater flexibility is required.

Rolls

Roll size: (W)50mm x (L)25 Metres. Available in several grades.

Hitachi 18V Combi Drill

33% increase over previous battery capacity.
Multiplex protection circuit for maximum battery life.
Same size and weight as 3.0Ah Li-Ion battery.
Extremely high maximum torque of 92Nm.
Lightweight slide-in Li-Ion batteries.
2 speed gearbox to suit most applications.
Raised body mouldings for extra protection against dust
and dirt.
Slimline soft grip handle.
Forward and reverse switch.
White LED spotlight illuminates workpiece.
Battery level indicator.
13mm metal Jacobs chuck with ratcheting lock.
Spindle lock.
Metal belt clip can be fitted for right- or left-handed use.

18V Combi Drill with 1 x 4.0Ah Li-Ion Batteries DV18DSDL/JV

Standard Accessories
1 x BSL1840 high capacity 4.0Ah Li-Ion batteries.
UC18YRSL charger.
Side handle.
Driver bit.
Carrying case.

Metal Boxes

Flush fitting metal outlet boxes. For use with plate switches sockets/cover plates.

3M Roloc? Brush Products

Designed for use on portable tools and featuring the convenient Roloc twist-on, twist-off fixing system.

Clean & Finish Flap Brush R

Flaps of high performance finishing web ideal for decorative finishing and light deburring applications.

York? Quick Change Screw Fitting Discs

For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC? system holders.



Zirconia Alumina Abrasive Discs for grinding and finishing of stainless steel.

SDS Plus Rotary Hammer Drill

No load speed: 1100rpm
Drilling capacities: steel 13mm, wood 32mm, concrete TCT 28mm/Core 80mm
Joules: 2.9
Weight: 3.3kg

Senator® Glass Paper

Suitable for joinery and general woodworking use. Ideal for surface preparation prior to painting. Size: (W)230mm x (L)280mm. Packs of 50. Several grades available. An assorted pack of 5 mixed grades is also available.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 41 Flat Reinforced Cutting

For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.
Grade A24 - For general purpose cutting on metals.
Grade C24 - For general purpose cutting on stone.