Kobe™ 3/4" Square Drive Air Impact Wrench

IW750
One piece aluminium housing, 10 position power regulator, thumb switch for reversing.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
25mm bolt capacity.
90psi air pressure.
7.5CFM* air consumption.
500ft/lbs torque.
Noise level: 83dB(A).
Vibration: 0.449m/s.
Overall length: 245mm.

*Based on a 15 second cycle per minute average use.

Kobe­™ Cordless Drivers

The Kobe™ AID14.4V cordless 6mm (1/4'') hex impact driver is a quality industrial power tool. The robust lightweight design incorporates a heavy-duty motor and gearbox; which are capable of handling the most demanding applications. The impact driver is well balanced to provide optimum manoeuvrability and control over extended periods of use, whilst the soft grip pistol grip handle sits comfortably in your hand. The quick-release 6mm (1/4'') hex bit holder, allows tool bits to be changed rapidly. The variable speed trigger controls the impact speed. Battery status can be checked using the integral battery level indicator.

AID14.4V NiMH (1.3Ah) 6mm (1/4") Hex Drive Reversible Cordless Impact Driver

AID14.4V Specification:
No load speed: 0 - 2,300rpm.
Screwing capacity:
Mechanical screws M4 - M8.
Standard screws M5 - M12.
High tension screws M5 - M10.
Maximum torque: 130Nm (1,300kg-fcm).
Impacts per minute: 0 - 3,000ipm.
Weight: 1.6kg.

Supplied with: two 14.4V NiMH batteries, one hour fast charger and carry case.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Hitachi 18V Impact Wrench

Charge time: 60min.
No-load speed: 1500/min.
Impact rate: 2000/min.
Max torque: 480Nm.
Capacity (bolt): M12-M22.
Capacity (HT bolt): M12-M16.
Overall length: 264mm.
Weight: 3.4kg.

Kobe Automatic Shut-off Air Screwdriver

Heavy duty reverse action pistol grip screwdriver suitable for production and assembly applications. Push to start type with auto shut-off clutch for precision applications. 3 interchangeable torque springs allow for easy conversion for new applications. 1/4" hex drive. External torque adjustment does not require disassembly of the tool. Variable speed throttle. Ergonomically contoured grip for operator comfort. Handle exhaust directs air away from the workpiece and operator. Hanging ring included.

CSP005S.
Chuck size: 1/4??(6mm) Hex.
Air inlet thread: 1/4?? NPT.
Minimum air hose size (ID): 3/8?? (10mm).
Green torque spring: 0.6-2.1Nm (5-19??/Lbs).
Black torque spring: 1.1-4.3Nm (10-38??/Lbs).
Yellow torque spring: 1.7-5.1Nm (15-45??/Lbs).
Air pressure: 90psi/6.2bar.
Air consumption: 4CFM.
Sound pressure level: 84dB(A).
Sound power level: 93dB(A).
Vibration level: 0.5 m/s2.
Overall length: 210mm.
Net weight: 815g.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Plain (no holes)

Diameter: 150mm.

Bosch® 4,1/2" Angle Grinders

GWS 9115AVH
With slim grip and anti-vibration handle.
Rated power input: 900W.
No load speed: 11,000rpm.
Disc diameter: 115mm.
Wire cup brush: 60mm.
Spindle thread: M14.
Weight: 2.1kg.

Disc supplied separately.

York? Depressed Centre Grinding Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ?free hand? or wet grinding. Optimum angle for use 25 to 35.

Type 27

Grade A30/A24. For general-purpose use on metals.

110mm Variable Speed Jigsaw

Variable speed jigsaw with soft grip handle. Four stage orbital action enables rapid and accurate cutting. Tool-free blade locking system. LED spotlight to illuminate cut line. Dust blower to ensure cut line is visible. Variable speed motor with electronic feedback speed control. Tough nickel plated die-cast aluminium base. Supplied with blade, splinter guard, chip guard, dust collector, hex key and tool case. Power input: 720W. No load speed: 850 - 3,000rpm. Capacities: mild steel 10mm, wood 110mm. Stroke length: 246mm. Min. corner radius: 25mm (1"). Length: 246mm. Weight: 2.2kg

CJ110MV

Kennedy® Extension Cables for Site Use

Waterproof spring loaded socket caps. Available as 1.5mm2 core cables rated to 16A over six hours and 2.5mm2 core cables rated to 32A over six hours (except KEN-282-2400K, rated at 16A). Plugs and sockets conform to BS 4343 : 1968.

240V 1.5mm Core