Secateur & Lopper Sharpener

Puts a sharp new edge on the bluntest secateurs, loppers, tree pruners and pruning knives ? curved or straight edge blades. Grinding jig ensures sharpening to the correct angle for your tool. Silicon carbide abrasive puts an extremely sharp edge on in minutes, even on the hardest steel. Abrasive stone lasts for years. Recommended by the Royal National Rose Society

Kennedy® Power Tool Chisels

Suitable for tools with SDS Max system.

Health & Safety Vacuum Cleaner

The handling of hazardous dust is a complex matter that demands innovative product development and competent engineering. As a specialist, Nilfisk-ALTO offers proven solutions in every Hazard Class involving the task of picking up health endangering dusts. See below for Class OEL levels.Approved for professionals. Working with hazardous dust demands the highest level of safety to ensure maximum protection. Nilfisk-ALTO offers Health and Safety vacuum cleaners for Hazardous dust classes ? L (light), M (medium), H (high), and Asbestos. The entire range is designed for professionals who demand low noise, ergonomics, long-life and Xperformance.

ATTIX30-0H PC

Achieving superior suction power in a compact and flexible solution. A perfect solution for craftsmen on the move.
Working sound level: 59dB(A). Airflow: 3700ltr/min. Vacuum: 250mbar. Cable length: 7.5m. Max. Permeability: 0.005%
Removes 99.995% of dusts with OEL values, carcinogenic dusts and dusts with germs or bacteria. With Push&Clean, to clean the filter, block the inlet fitting or the hose, and push and release the filter cleaning button. Powerful air pulses clean the filter and you are back to work in no time.

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

355mm (14") High Speed Cut Off Machine

A powerful 2400W motor (240V) with spindle lock for quick & easy wheel replacement fitted with a spark guard and quick locking vice assembly. 45 mitre facility and D-shaped soft grip handle minimising vibration. Supplied with 8mm hex key and cut-off wheel.
Power input: 2,400W.
No load speed: 3,800rpm.
Wheel diameter: 355mm.
Wheel bore: 25.4mm.
Capacities: round pipe 120mm, shaped steel 106 x 106mm, bar 65mm.
Length: 603mm.
Weight: 16.5kg.

CC14SF

York? Adhesive Backed Discs

Adhesive backed aluminium oxide paper discs requiring no tools to change the disc, when the abrasive becomes worn or a different grit is needed just peel off and apply a fresh disc, reducing machine downtime therefore increasing productivity.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Inox BF Cut-Off Discs

Iron, chlorine and sulphur free. Thin 1.0 mm discs that enable you to achieve a uniquely clean cut in the shortest possible time whilst using minimum of force. vibration-free cutting, no thermal bluing and no burring. For use on thin sheet metal, steel cable, thin-walled profile sections, stainless steel pipes and non-ferrous metals. Max. operating speed: 13280 r.p.m.

3M Premium Cubitron™ Fibre Discs

985C
3M's premium blended Cubitron™ disc. Superior performance in all metal grinding applications. More aggressive cut and longer life than 3M 785C discs. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

178mm Diameter x 22mm Bore (Max 7,000rpm)

1/2" Very Heavy Duty Impact Ratchet

CP-749
Oil bath 'spring hammer' clutch mechanism for ultimate power, high durability and reduced vibration. Differential regulator with four positive power settings in forward and ultimate power in reverse. 1/4" npt air inlet thread for 10mm air hose, 16mm bolt capacity, 5cfm* air consumption 625ft/lbs torque.
Overall length: 175mm.



*Based on a 15 second cycle per minute average use.