Kobe Inspection Lamp

The Kobe hand held lead lamp features a unique gripping mechanism incorporated into the handle allowing it to be clamped in exactly the right place that you're working in or inspecting; or it can simply be hung in position using the integral hanging hook mounted on the heavy duty wire cage that protects the glass bulb cover from impacts when being repositioned. The Clamp "Gripper" or hanging facility is ideal for 'hands free' multi directional illumination for countless applications in the garage, workshop and home. The high strength spring loaded metal clamp has plastic swivel contact points to protect the surface being gripped from damage. The handle on the Kobe lead lamp has a soft touch rubber 'grip zone' for user comfort.

110V Lead Lamp with Gripper

Accepts Screw fitting bulbs up to 60W (bulb not supplied). Fitted with 5M cable. Fitted with a BS approved plug. CE approved.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W193. Grade: RA60. Diameter: 16mm. Length: 10mm. Max. rpm: 61,000. Weight per 10: 140g.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Inox BF Cut-Off Discs

Iron, chlorine and sulphur free. Thin 1.0 mm discs that enable you to achieve a uniquely clean cut in the shortest possible time whilst using minimum of force. vibration-free cutting, no thermal bluing and no burring. For use on thin sheet metal, steel cable, thin-walled profile sections, stainless steel pipes and non-ferrous metals. Max. operating speed: 13280 r.p.m.

Trade Medusa Generators

15 litre long range tank, 3hrs running time. 2x 230V AC three pin UK sockets and 12V DC socket. 5HP four stroke OHV air cooled engine, maximum output 2.4KVA. Low oil alert. Low noise. Optional wheel kit available. One year warranty.

03921 Trade Medusa T2401

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kobe? Air Blow Gun

Ideal for general air dusting jobs. Ergonomic design with trigger style operation. Lightweight and impact resistant body with integral air control valve. 1/4" brass BSPT inlet.

Specifications:
Temp range: -17 to 37C.
Minimum working pressure: 43psi (3bar).
Safe working pressure: 150psi (10bar).

SIP Trade 24 Litre Portable Air Tank

06298 - Stand Alone
24 litre air receiver, a convenient and portable supply of stored air. Ideal for when it is not possible to use a compressor - just load the receiver and take it with you. Complete with pressure gauge.

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Straight Type

Impact sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Impact Hexagon Bit

Drivers 1/2" sq. dr. Hexagon sizes: 6, 7, 8, 10, 12, 14, 15, 17, 18 & 19mm

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.