York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Round Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Norton Depressed Centre Reinforced Cutting & Grinding Discs

A range of discs for all angle-grinding of both metal (aluminium oxide) and stone (silicon carbide).

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A12. Grade: RA46. Diameter: 18mm. Length: 32mm. Max. rpm: 48,000. Weight per 10: 210g.

Dronco Diamond Cutting Blades

Dry cutting diamond disc which is sintered and segmented designed to cut construction-site materials with a good price/performance ratio. For use on all kinds of construction site material.

ST7

Kennedy® Wet or Dry Silicon Carbide Paper

Silicon Carbide is waterproof-resin bonded to paper suitable for wet and dry production polishing and finishing of a wide range of materials including metals, plastics, paintwork, ceramics etc.

Wet or Dry Paper Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Canning-Lippert "B" Quality Mops WO 2899 - Stitched Type

All round mops as above with 3/8" (9.5mm) spiral stitching. Having all the attributes of the above mops but will not splay to the extent of the open type giving greater polishing pressure. Fitted with washers for taper spindle use. Can be used in conjunction with Lustre, Hyfin, Steelbrite, Scovax, and Satene compositions.



Product Number: 0229-704. Diameter: 8". Width: 2". Weight: 980g.

Cylinder Mower Sharpener

Accurately re-sharpens cylinder mower blades to the correct angle. The result: a clean smooth cut to the lawn, with less mowing effort.
Simply fixes to the bottom plate* of the mower while sharpening (*every cylinder mower has one). With the power switched on, the blades spin against the powerful aluminium oxide abrasive, and are automatically sharpened to the correct angle.
3 abrasives supplied to correctly sharpen even blunt mowers.
Sharpens nearly all models of the following mower makes: Qualcast, Suffolk, Bosch, Black & Decker, Atco, Ransomes, Husqvarna, Flymo, Performance Power, Webb - whether petrol, mains electric, battery or hand.

MS1109E

To fit 38cm mower cylinders.

Garryson Flap Discs

Suitable for a wide range of materials and applications, offering consistant grinding and finishing performance, long life compared to resin fibre discs and reduced vibration and noise compared to depressed centre grinding discs.

Standard Density - Zirconium Flap Discs

Ideal for use on most ferrous metals and for a wide range of applications such as weld seam removal, surface blending, edge grinding and weld preparation.
Disc diameter: 115mm.
For stainless steel.

Makita Reciprocating Saw - with Orbital Action

Can be used for cutting sheet, pallets, wood with nails, plastic, cast iron pipe. Remedial work. Window replacement. Pruning and brush cutting. Vibration only 17.5m/sec.

Specifications:
Max. cut in pipe: 130mm.
Max. cut in wood: 255mm.
Length of stroke: 32mm.
Strokes per minute: 0-2800spm.
Orbital action: Yes.
Input wattage: 1100W.
Weight: 4.2kg.
Supplied with: Recipro blades.

Available in 240V and 110V.

JR3060T