York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10's 6's. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 50mm Height 10,200 MOS (rpm)

Spares to suit Osaki™ CPW110 Pressure Washer

N.B. Pressure Washer not included.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W159. Grade: RA100. Diameter: 6mm. Length: 5mm. Max. rpm: 92,000. Weight per 10: 20g.

Air Tool Chisels with 0.401" Shank

For All Brands of Portable Air Chisels including CP, Desoutter, Kobe, Toku and YK.

Osaki™ Pressure Washers

The CPW090 cold water pressure washer from Osaki is compact and fully portable. It can either be carried or towed using the towing handling, large wheels make it easy to transport and position the CPW090 to where you require it. Suitable for cleaning vehicles, patios and other light duty applications.

CPW090 Cold Water Pressure Washer 90 Bar 230V

Specifications:
Nominal voltage: 230v 50Hz.
Power consumption: 1500W.
Working pressure: 90bar(1305psi).
Max permissible pump pressure: 160bar(2320PSI).
Working flow rate: 6 1/min.
Maximum water supply pressure: 0.4MPa.
Motor rotation speed: 2800rpm.
Maximum water temperature: 50°C.
Noise level: 80db(A).
Vibration level: 0.9m/s2.
Water protection: IPX5.
Hose length: 5M.
Weight: 12kg.

Supplied with an adjustable lance nozzle for fan or open jet wash pattern and 5M high pressure hose and trigger gun.

FOR DIY USE
Not Warranted for Industrial Use

Bosch Style Chisels

Suitable for air and electric hammers and breakers, for all classes of work.



For Bosch: USH27, USH28, 11304, 11308, 12314. 29mm Hex Shank with Single Flat.

Kennedy® Spare Halogen Bulbs

Halogen. Suitable for use with all standard PIR lights mini-pod floodlights, tripod site lights etc.

Halogen Tube Bulbs

Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki™ Mini Metalworking Lathe (OSA-271-5000K) are available.

For full details please refer to our catalogue.

Clamping Kit for Face Plate

Kobe? Saw Blades

HSS body saw blades with two tooth pitch variations. 24 tooth (medium) and 32 tooth (fine) to suit a wide range of applications. N.B. Tool not included.

Trend Router Cutters

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Two Flute Flush Trimming Bits

1/4" and 1/2" Shanks