York? Non-Woven Abrasive Hand Pads

A range of non-woven fibre hand pads for cleaning, blending and finishing applications. Size: 155 x 225mm.
Supplied in packs of 10.

Maroon - X-fine

A general purpose conformable hand pad which gives a finer finish than the Green hand pad.

York? Drum Holders

Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.

3M 734 Wet or Dry? Silicon Carbide Paper

Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

40mm Dia x 25mm Height 15,300 MOS (rpm)

GA4034

Compact, lightweight and double insulated for added safety.
Comes with side handle and wheel guard.
Specifications:
Wheel size: 100mm
Bore Size: 16mm
Spindle size: M10 x 1.5mm
No Load Speed: 11,000rpm
Output: 840W

Kennedy® M2 Multi-Tooth Milling Cutters

For use with all multi-tooth milling cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for "blind" or "through" pilot holes, pin will retract into cutter adaptor on "bottoming".

Pilot Pins

Bore diameter: 20mm.
Overall length: 156mm.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

40mm Dia x 25mm Height 15,300 MOS (rpm)

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B115. Grade: RA100. Diameter: 2.5mm. Length: 3mm. Max. rpm: 100,000. Weight per 10: 20g.

Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Plain (no hole)

Diameter: 150mm.