Karcher Wet & Dry Vacuum Cleaners

A new powerful and extremely robust wet & dry vacuum cleaner equipped with a unique, highly efficient, automatic filter cleaning device (TACT) designed to pick up large quantities of fine dust whilst maintaining constant high suction power.

This indispensable all purpose vacuum is great for keeping workshops or building sites clean. With a new innovative TACT (Triggered Air draft Cleaning Technology) system, Kärcher sets new standards in filter cleaning efficiency. This works via pressure reversal or filter back flushing which is activated every 15 seconds. Productivity is increased as the service time for filter and bag cleaning/changes are not required as often.

Features:
Constant high suction power - As a result of the fully automatic TACT filter cleaning system.
Innovative Eco flat pleated filter system.
On/off switch for TACT system with LED display.
Kärcher clip-system (suction hose).
Integrated accessory holder on back of the machine.
Suction hose and power cord can be stored on the turbine head.
Large recessed flat tray on top of the unit for holding tools and accessories.

NT 35/1 Wet & Dry Vacuum Cleaner

NT35/1 Specifications:
Max. power rating 1380W.
Air flow rate 61 l/s.
Vacuum max 23.0 KPa.
Container capacity 35L.
Weight 11.5kg.
Cord length 7.5m.
Noise level 64dB(A).

N.B. 110V version supplied without a plug.

York? Polishing Mop Kits

York abrasives polishing kits contain the highest quality cool running pleated calico or sisal mops and polishing compositions to allow you to achieve the best results possible, on the material being polished. Each kit is supplied with step by step instructions and a unique non-loosening reverse wound arbor to allow use with drills, die grinders or bench grinders.

Wood Polishing Kit

1 x Arbor 6mm shank
1 x Denibbing disc 4" x 1" with 3/8" bore
1 x Hard calico mop 4" x 1" with 3/8" bore
1 x Soft calico mop 4" x 1" with 3/8" bore
1 x 100gsm general finishing composition - beige bar.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 27 General Purpose Metal A30R Grinding

For steel/stainless steel. Fast material removal. General-purpose applications. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 10.

SIP Trade 3.0hp Dust Collector – Two Bag

01954
For up to 2 Machines
Dual input capable of running one or two woodworking machines simultaneously. Powerful 3hp induction motor gives smooth, long lasting performance. Very sturdy steel construction. Mounted on free running castors for increased manoeuvrability. Quick release stops. Inlet blanking adaptors supplied. Connection hose not included. 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 2230w (3hp).
Fan diameter: 300mm.
Inlet diameter: 1 x 150mm or 2 x 100mm (with adaptor).
Air flow: 6963 m3/hour.
Bag capacity: 153L.
Weight: 47kg.

Kennedy® Router Cutters

With ball bearing guide. Tool will produce an ovolo mould to window frames, sashes and glazing bars. Cabinet doors and frames, trophy plaques/plinths, shelves, etc. Self guiding with ball bearing.

Two Flute Beading Bits

Bosch 18V Compact SDS+ Hammer Drill

The GBH 18 V-LI Compact Professional is the smallest and lightest cordless rotary hammer in its class. With its weight of only 1.9kg and a length of 278mm, working overhead and in confined spaces is a cinch. A drilling diameter of up to 12mm into concrete combined with a powerful 1.0 Joule of impact force make it the perfect drill for plumbers and electricians.

GBH 18VLiCP 18V Compact SDS+ Hammer Drill with 2 x 1.5AH Batteries

Max. impact energy: 1J.
Impact rate at rated speed 0-4: 950bpm.
Rated speed: 0-1050rpm.
Battery voltage: 18V.
Weight incl. battery: 1.9kg.
Length: 278mm.
Height: 202mm.
Toolholder SDS-plus.
Drilling diameter in concrete with hammer drill bits: 4-12mm.
Optimum range of applications in concrete with hammer drill bits 4-8mm.
Max. drilling diameter in steel: 8mm.
Max. drilling diameter in wood: 16mm.
Total shipping weight: 6kg.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Straight Shank Suitable for Fein, Wolf and Kress. HCS - Medium Duty (Pack 5)

Capacities: Wood - 70mm, Plastic - 50mm. Tooth pitch: 4.0. Effective length: 85mm. Tapered & ground teeth.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Round Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® "Ultimate" Merino Sheepskin Bonnets

Genuine 100% sheepskin tie-on bonnets ideal for polishing metal, glass fibre, wood and painted surfaces. With tie cord. 32mm pile. Maximum 2,500rpm - Best results are obtained with a tool speed of 1,500 - 2,000rpm. Not suitable for wet use. Support pad supplied separately.