York? Flexible Abrasives

Abrasive covered foam for general-purpose sanding on wood.

Double-Sided Pads

Flexible abrasive coated sponge pads will conform to most contoured surface shape. Coated with abrasive on both sides. Available in three different grades. Size: 98 x 230 x 12.5mm.

Cordless Grinder

Powerful fan cooled motor delivers maximum power and durability for most cutting and grinding applications.

Power Output: 815W
No Load Speed: 6500rpm
Battery Capacity: 2.2Ah
Spindle Thread: M14
Weight: 3.5kg

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Glass Fibre Backed (General-Purpose - Non-Scratch)

127mm Dia x 22mm Bore 12,000 MOS (rpm).

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 60 Inc. Angle

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B62. Grade: RA80. Diameter: 13mm. Length: 10mm. Max. rpm: 41,000. Weight per 10: 40g.

York? Steel Arbor for Polishing Mops

For use with small polishing mops and felt bobs up to 100mm (4") in diameter. Can be used in scroll type chucks used on flexible drive equipment, power drills or specialised polishing machinery.

York? Depressed Centre Grinding Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ?free hand? or wet grinding. Optimum angle for use 25 to 35.

Type 27

Grade A30/A24. For general-purpose use on metals.

Cordless Impact Driver

14.4V impact screwdriver that delivers high torque for excellent performance. Supplied with carry case.

No Load Speed: 2600rpm
Battery capacity: 3.0Ah
Machine Screw: M4-M8
Standard Bolt: M5-M14
Impact rate: 3200rpm
Weight: 1.6kg

Naked tool only - Batteries and Charger supplied separately.

Creusen Bench Grinder Accessories

Grinder eyeshield for WS520 Wall Stand (CSN-261-5200K)

Eyeshield