Kobe Air Tools

Kobe Air Riveter Nose Piece for use with different sized rivets.

Air Riveter Nose Piece

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes - Shaft Mounted

For all round use, ideal for work on larger surfaces removing burrs, rust and paint. 6mm Shanks. 30 SWG.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Aluminium Backed (For Stainless Steel)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

30mm Dia x 10mm Height 20,400 MOS (rpm)

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Blue Line - Fine

Cross cut blades, designed with a high TPI. Suitable for cross grain cutting solid wood giving a good finish.

Kennedy® Slip Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Silicon Carbide

For sharpening curved edge cutting tools.

3M Red Paper Rolls

A very open coat "F" weight paper roll designed to minimize loading when used to sand soft resinous woods. Dimensions: (W)115mm x (L)50M. Several grades available.

Karcher Industrial Pressure Washers

The HD 5/11 C is a compact, lightweight, and high value professional pressure cleaner. With a height adjustable handle, triple nozzle for cleaning of a variety of surfaces and dirt types and a three-piston axial pump, the 5/11 C offers exceptional value and performance.

Features and Benefits:
3 piston axial pump with brass water inlet and cylinder head for long service life.
Extended trigger gun with 10m high-pressure hose.
The triple nozzle provides optimum cleaning flexibility and effortless change over of the cleaning jets.
Automatic pressure controlled shutdown upon trigger release for low energy consumption.
Adjustable aluminium push handle provides easy manoeuvrability and accessory storage.

HD 5/11 C Cold Water pressure Washer

HD5/11C Specification:
Water flow rate: 400 l/h
Pressure: 100/10 bar/MPa
Max. water feed temp: 60°C
Connected load: 2.2kW 1.6kW
Weight: 19kg
Dimensions: 375x360x935mm (L x W x H)

Available as:
110V Order Code: KAR-273-3220F
240V Order Code: KAR-273-3230G

York? Mandrels

For use with Cartridge Rolls. This steel adaptor is used to secure and hold both tapered and parallel sided cartridge rolls to air grinders or electric drills. This holder is used by sliding the cartridge roll onto the mandrel pilot until the bottom of the abrasive touches the threaded steel area. Simply screw the cartridge roll onto the threads to secure. Your mandrel should be at least 13mm longer than your cartridge roll.