Paslode Nail/Fuel Packs

To be used with Paslode IM350+ 90mm Gas Framing Nailer.

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



13mm Wide x 457mm Long.

36v LXT SDS Combi Hammer Drill

These 36V cordless combination hammers feature compatability with both Makita 36V - 2.6Ah Li-Ion battery BL3626 and
36V - 2.2Ah Li-Ion battery BL3622A. Electric brake, variable speed control and trigger torque limiter. 40 different bit-angle settings. Vibration absorbing handle. LED job light with preglow and afterglow functions. Three mode operation - rotation + hammering, rotation only and hammering only.

Specifications:
Battery type: lithium-ion.
Battery: 2.6 Ah.
Charging time: 22 min.
Voltage: 36V.
Operation modes: RO/RH/HO.
Maximum drilling capacities:
masonry 26mm, steel 13mm, wood 32mm.
Impacts per minute: 0 - 4800ipm.
No load speed: 0 - 1200rpm.

BHR262TRDE 36V LXT Hammer Drill 2x2.6AH LI-ION Q/C Chuck

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez D.S. Medium/Soft Aluminium Oxide

This is a popular, fast-cutting stone which does not load easily. Good for all dies and moulds. Length: 150mm.

Engis Hyprez Five Star Diamond Compounds

Hyprez Fivestar combined formula compound provides the unsurpassed cutting capability of natural diamond with the impact resistance of manufactured diamond. Formulated to withstand severe lapping conditions, the use of a stable carrier ensures sustained particle suspension throughout the process and an even surface coverage improving impregnation of laps. Suitable for use with Hyprez type OS (Oil Soluble) or Type W (Water Soluble) lubricants to meet specific requirements of material and surface finish. The Hyplicator dispensing syringe allows a precisely measured amount of compound to be applied, preventing contamination and wastage.

Final Polishing

3M Scotch-Brite Hand Pads

A range of Scotch-Brite Hand pads designed for cleaning, blending and finishing applications on a variety of metals. 155 x 255mm.
7440 Brown ACRS: Heaviest duty pad in the range. Used for light deburring, cleaning and finishing applications.
7446 Grey SCRS: For heavy finishing and blending.
7486 Dark Green ACRS: For medium to coarse finishing and blending.
7496 Green AFIN: A general-purpose conformable hand pad which gives a slightly coarser finish than the Maroon 7447 hand pad.
7447 Maroon AVFN: General-purpose hand pad for cleaning and finishing. It can also be used for lacquer de-nibbing and mat finishing on solid surfaces.
7448 Grey SULFN: Ultra fine pad for light finishing on all minerals as well as lacquer de-nibbing.
7441 White Type T: Non-abrasive. For the removal of oxides and coatings, produces a scratch-free finish.

Wet & Dry Vacuum Cleaner

70ltr stainless steel tilt or lift-out container. Automatic filter cleaning. Washable PET Fleece filter element. Low working noise level lets the operator work when others are nearby, without disturbance. Automatic on/off models are the choice for operators who use the machine with electric hand tools because starting or stopping the tool starts and stops the vacuum, as well. An airbox is available as an accessory which performs the same function when using pneumatic tools.
Specifications: Air flow rate: 3600ltr/min. Vacuum: 230/23mbar/kpa. Power: 1500W. Working sound level: 57dBA. Container volume: 70ltr. Dimensions (L x W x H): 605 x 580 x 970mm. Cable: 7.5m.

Attix 751-11

Chicago Pneumatic 10mm Reversible Pistol Drill

CP1664
10mm capacity chuck. Compact and lightweight pistol drill with sliding reverse control. Quick change for forward and can be used for drilling and screwing.

Power: 0.19kW.
Free speed: 2,000rpm.
Chuck capacity: 10mm.
Spindle thread: 3/8” - 24.
Maximum torque: 1.8Nm.
Air consumption: 9.3ltr/s (19.7cfm).
Sound pressure level: 83dBA.
Air inlet: 1/4”.
Overall length: 225mm.
Weight: 0.70kg.

York? File Belts

Suitable for a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.

Packs of 10

13mm Wide x 457mm Long.