3M Flap Discs 566A

Good performance at an economical price. Available in P120 for finer blending, refining and finishing work.

Applications: weld grinding, stock removal, deburring, deflashing, gate removal, edge chamfering, cleaning, blending, finishing.
Materials: all metals.
Mineral: alumina zirconia.
Backing: X-weight cotton cloth on reinforced glass fibre resin.
Coating: closed.
Bond: resin.

Conical Flap Discs

Size: 115mm.
P40, P60, P80 and P120 grit.

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)13mm x (W)10mm.

Kennedy® Router Cutters

With ball bearing guide. For producing a rebate to a wide variety of components including picture, door and window frames. With ball bearing guide ensuring accurate depth of cut, eliminating the need for jigs and fixtures. Ideal for straight, curved and shaped work.

Two Flute Rabbeting Bits

York? Reducing Bush Set

Contains: 1/2", 5/8", 3/4" and 1".

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Plain (no holes)

Diameter: 150mm.

18V Drill Driver

Standard Equipment
Charger, Batteries, Double Ended Bits
No Load Speed: H:0-1300rpm L: 0-400
Torque Settings S/H Nm: 16+ Drill
Max Torque: 37/42nm
Max in Steel: 13mm
Max in Wood: 36mm
Charging Time: 30min
Net Weight: 2.2kgs

6391DWP3

Dronco Cutting Discs

The special line for craftsmen and industrial applications. Due to the fact that different materials impose different demands, DRONCO produces discs especially matching the respective material. Special types of corundum and bonds are combined to suit the task in hand. This optimises performance, extends service life, increases efficiency and reduces cutting time. Manufactured according to EN 12413. Complies to oSa regulations.

Dronco Inox Cutting Discs

Characteristics: This very thin disc (1.0 mm) enables you to achieve a uniquely clean cut in the shortest possible time while using a minimum of force. Precise to the millimetre, vibration-free cutting, no thermal bluing and no burring. Field of Application: Thin sheet metal (of the type used in car bodies and the tank construction sector), steel cable, thin-walled profile sections and pipes made of stainless steel and non-ferrous metals. Composite materials (FRP). Max. operating speed: 15250 r.p.m.

York? Surface Conditioning Discs

For removing grinding marks and scratches leaving a greatly improved surface finish.

Fibre Backed

For use with a regular (sanding disc) flexible backing pad.

Canning-Lippert "G" Quality Mops - Open Type (Soft)

Designed to produce high quality finishes on non-ferrous metals such as brass, copper, aluminium and pewter. Can also be used on plastics for a medium finish. Open type construction for medium polishing pressure. Can be used in conjunction with Hyfin and Steelbrite compositions.



Product Number: 0201-060. Diameter: 4". Width: 2".

York? Depressed Centre Grinding Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ?free hand? or wet grinding. Optimum angle for use 25 to 35.

Type 27

Grade A30/A24. For general-purpose use on metals.