3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

Surface Conditioning Discs

Reinforced Scotch-Brite web designed for cleaning and finishing on all metals. Leaves a burr-free surface for painting and coating for removal of light rust, oxides and coatings.
Maximum rpm.25mm Discs = 25000rpm.
50mm Discs = 23000rpm.
75mm Discs = 18000rpm.

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W174. Grade: RA60. Diameter: 10mm. Length: 6mm. Max. rpm: 60,000. Weight per 10: 30g.

Kobe™ 4-Socket Cable Reels

4 socket, 240V/13A versatile cable reels for home and office use. Fully enclosed cassette with built-in carry and winding handle. Conform to BS6500/1363A/EN61242, fitted with a safety cut-out switch. Lifetime guarantee.

Makita Batteries for Cordless Tools

Spare batteries offer the advantage of continuous tool use while original batteries are charging therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing. Nickel Cadmium (Ni-Cd) and Nickel-Metal Hydride (Ni-Mh) versions available.

NiCd Batteries - ?Plug-In? Type

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

York? Surface Preparation and Finishing Discs

A complete range of flexible surface preparation discs from coarse grit through to a fine polishing disc allows you to rapidly and consistently achieve the finish you require. Ideal for rust removal, preparing and cleaning welds. The threaded mounting allows rapid disc change when required.

Surface Preparation and Polishing Kit

Contents: 1x M14 backing pad, 2x surface conditioning discs brown (CRS), 1x surface conditioning disc in colours: maroon (medium), Blue (very fine) and grey (ultra fine), 1x felt disc (white) 1x bar of compound (yellow).

York? Nylon Interleaved Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Interleaved Wheel 60 x 30mm

Suitable for: Deburring, producing cosmetic finishes on most materials, rust removal, blending.

York? Abrasives Pre-Finish & Polishing Compounds

York? Abrasives have a compound bar for every polishing job! They are manufactured using the finest quality ingredients to ensure that you get the highest quality results every time on all metals, plastics and glass. They are excellent high performance polishing compounds, not too waxy and not too dry.

For the full range of York? Abrasives polishing mops and compounds please refer to our catalogue.

Mirror Finish Polishing Compound Bar

This bar has a composition that produces a superb mirror finish on stainless steels, chrome plate and non-ferrous metals. Dimensions: 52x220x57mm (HxWxD). Average weight: 1kg.

Replacement Dust Bags WV750/WV950 Vacuum Cleaners

NVM4B Replacement Dust Bags WV750/WV950 Vacuum Cleaners pack of 10