York? Nylon Interleaved Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Interleaved Wheel 76 x 25mm

Suitable for: Deburring, producing cosmetic finishes on most materials, rust removal, blending.

Kennedy® Router Cutters

With Ball Bearing Guide. To trim laminate producing a bevelled edge. With ball bearing guide suitable for straight or shaped work.

Bevel Edge Trimming Bits

Hitachi Variable Rotary Drill

Lightweight and compact size with a high speed 240W motor. Supplied with chuck key, depth stop, belt clip.
No load speed: 4500/min.
Power input: 240W.
Capacities: steel 6.5mm, wood 9mm.
Chuck capacity: 6.5mm.
Overall length: 206mm.
Weight: 0.9kg.

Available in 240V and 110V.

D6SH

Paslode Nail/Fuel Packs

To be used with Paslode Impulse IM65 F16 Gas Brad Nailer.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

40mm Dia x 20mm Height 15,300 MOS (rpm)

Norton Abrasives

Advanced grain and bond system for longer life and quicker cutting. Suitable for steel and stainless steel applications. Free from iron, sulphur and chloride. For use with portable angle grinders. Type 42 (depressed centre).

Type 42 Cut Off Discs

York? Nylon Finishing Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Finishing Wheel 50 x 25mm

Ideal for: Matching/blending a finish, light deburring, decorative/cosmetic applications.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Glue Sticks.

For use with industrial and standard glue guns. Clear 6330: Provides a translucent bond in seconds. For use on metals, stonework, cardboard and fabric. Can also be used on flexible materials such as plastic.



5kg Box