Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B51. Grade: RA80. Diameter: 12mm. Length: 19mm. Max. rpm: 45,000. Weight per 10: 50g.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A14. Grade: RA60. Diameter: 18mm. Length: 22mm. Max. rpm: 55,000. Weight per 10: 550g.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)38mm x (L)50 Metres. Available in several grades.

Kennedy® 3 Pin Plugs For Indoor Use

Male 3 pin plugs rated to 13A. Resilient nylon, white (office/domestic type) or shatterproof rubber. Conform to BS 1363:Part 1:1995.

Kennedy® Buffing & Polishing Foams

Ultra soft reticulated foam for final polishing/finishing. Designed to allow free flow of air.

Red Final Polishing Foam Buffing Pads

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A13. Grade: RA60. Diameter: 28mm. Length: 28mm. Max. rpm: 34,000. Weight per 10: 390g.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)25mm x (L)50 Metres. Available in several grades.

Kennedy® Plasterers' Lights

Designed for use by plasterers' and painters' where there is a need to eliminate shadows. Lightweight, portable and weatherproof 110V lights with two 110V outlet sockets. Available in 2 versions as a folding or tripod type.

Plasterers' Light - Tripod Type

Light can be positioned either horizontally or vertically. Constructed from heavy duty steel tubing. Works with 5ft (58W Max.) low energy fluorescent tube (Supplied separately). 5 metre cable.

Kennedy® Router Cutters

To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Two Flute Rounding Over Bits