Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe? Pillar Drill

The DPF550 pillar drill is suitable for workshop and light industrial use. The smooth running 550W motor provides enough power to drill holes up to 20mm. 12 speeds for versatility and performance when drilling different materials. No volt auto-release switch which switches off when voltage is removed by power cut etc. This stops the machine from starting up on its own when power is restored. Tilting work table with rotating rise and fall rack and pinion. Operates from a standard 13amp plug.

DPF550 12 Speed Pillar Drill Floor Standing

DPF550 pillar drill specification:
Motor input capacity: 550w
Motor output capacity: 450w
Motor supply voltage: 230v/50hz
Spindle travel: 80mm
Spindle taper: mt2
Column diameter: 80mm
Drilling speeds (12): 200?2600rpm
Max. Distance from spindle
Axis to surface of column: 190mm
Max. Distance from spindle
End to surface of table: 725mm
Max. Distance from spindle
End to surface of base: 1220mm
Table size: 300x300mm
Base size: 500x300mm
Overall Dimensions: 1610(h)x350(w)x700(d)mm
Weight: 79kg

Kobe™ Generators

The Kobe™ GPP230 frame mounted petrol generator can deliver a 2.3kVA 110V or 220V supply for up to nine hours on a single tank of fuel; making it ideal for builders, contractors, mobile caterers, etc. for powering lighting, freezers, power tools, water pumps and
other electrical items.

Features include:
Brushless alternator producing:
2.3kVA/2.3kW maximum power,
2kVA/2kW continuous power.
One 220V AC and one 110V AC outlet.
Voltmeter.
Circuit breakers.
12 litre fuel tank with fuel level indicator.
Approximately 9 hours running time.
4 stroke, 6.0hp, OHV, single cylinder, air cooled engine that runs on unleaded petrol.
Low oil alert and shutdown.
Recoil starter.

GPP230 2.3kVA Portable Petrol Generator Dual Voltage 110/220V

GPP230 Specification:
Fuel Tank Capacity: 12L.
Fuel Type: Unleaded petrol.
Oil Capacity: 0.6L.
AC Output: 220V/110V 60Hz Single phase.
Continuous Power: 2kVA/2kW.
Maximum Power: 2.3kVA/2.3kW.
Engine Type: 6.0hp, 4 - stroke, OHV, single cylinder, air cooled, 3,000rpm, 171cc displacement.
Alternator Type: Brushless.
Sound Power Level: 94dBA.
Sound Pressure: 72.2dBA.
Running Time: Approx. 9 hours @ 75% load.
Net Dimensions: 425x515x430mm (HxWxD).
Net Weight: 39kg.

It is advisable to properly earth (ground) the Generator before using it. Use a 1.2mm2 copper wire attached at one end to the Generator?s earth connection point and the other end connected to an earthing rod set in the ground.

This will also dissipate the static electricity which will build up in the Generator during use.

Please note:
The earth wire and rod are not supplied with the Generators. An earthing rod kit is available separately: Order Code: KBE-280-9000K.

Kobe Bench Pillar Drills

Kobe bench pillar drills are suitable for workshop and light industrial applications. Supplied complete with laser light drilling guide, that helps improve accuracy on repeat drilling operations and a adjustable height and angle machine table for securely clamping the work piece to.

Available as a:
5 Speed 350W bench drill, order code: KBE-271-2030K.
12 Speed 500W bench drill, order code: KBE-271-2110K.

DPB350 Bench Mounted Pillar Drill 5spd 350W

Kobe? DPB350 Bench Mounted Pillar Drill specification:

Chuck capacity: 13mm
Motor input capacity: 350W
Motor output capacity: 210W
Motor supply voltage: 230V/50hz
Laser power: DC3V <1mw
Laser wavelength: 650nm
Spindle travel: 50mm
Spindle taper:.mt2
Drilling speeds (5): 580?2650rpm
Table size: 152x170mm
C/w side plates:192mm (max272) x170mm
Base size: 320x190mm
Column diameter: 50mm
Sound power level:77.9 dBa
Sound pressure level: 64.9 dBa
Net dimensions: 720(h) x 220(w) x 455(d)mm
Net weight: 24kg
Max. Distance from spindle
Axis to surface of column: 102mm
Max. Distance from spindle
End to surface of table: 250mm

Kobe™ "Oil-Free" Compressors

These Direct Drive oil-free compressors are built of quality materials to ensure trouble free use and can be run on a normal 240v domestic supply. Robust in manufacture, they all come with a pressure cut-off switch, fully automatic stop/start control, tank and line pressure gauges and an air outlet regulator.

2HP 23Ltr Compressor

These two compressors share the same robust 2HP direct drive motor producing an 8Bar/115psi working pressure and an air supply of 8CFM/230Ltr/min which is enough to run most air tools.

Kobe? Plastic Air Blow Gun

Trigger operated blowgun with angled 110mm long nozzle lance. Lightweight impact resistant nylon body with hanging point, high grip handle with fitted 1/4" BSP brass air inlet ferrule. Suitable for quick removal of chips, swarf, dust and particulate from any surface. Ideal for production line, factory, workshop or body shop use. The long extended nozzle allows the airflow to be directed into the area it is required.

Specifications:
Operating temperature range: -10C to 50C.
Minimum working pressure: 43psi (3 bar).
Maximum operating pressure: 150psi (10 bar).

Kobe™ "Oil-Free" Compressors

These Direct Drive oil-free compressors are built of quality materials to ensure trouble free use and can be run on a normal 240v domestic supply. Robust in manufacture, they all come with a pressure cut-off switch, fully automatic stop/start control, tank and line pressure gauges and an air outlet regulator.

1.5HP 6Ltr Compressor

This compressor may be small in size and weight (only 18.6Kg) but it has an output of up to 8Bar producing up to 115psi and 140Ltr/min.
Suitable for DIY, home improvement and workshop use, NOT suitable for continuous use.

Kobe™ "Oil-Free" Compressors

These Direct Drive oil-free compressors are built of quality materials to ensure trouble free use and can be run on a normal 240v domestic supply. Robust in manufacture, they all come with a pressure cut-off switch, fully automatic stop/start control, tank and line pressure gauges and an air outlet regulator.

2HP 46Ltr Compressor

These two compressors share the same robust 2HP direct drive motor producing an 8Bar/115psi working pressure and an air supply of 8CFM/230Ltr/min which is enough to run most air tools.

Heat Gun Accessories

For spreading hot air over large areas.

Surface Nozzle

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.