Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe? Sanding Sheets

Packs of 10 in 60 grit, 100 grit and 150 grit.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

KOBE 100mm (4") 700W Angle Grinder - 240V

700W motor. Aluminium alloy gear housing. Slim low profile body design for easy use and access. Multi-position side handle. Disc guard can be turned 60°. Spindle locking device. Disc not included.
Disc size: 100mm (not included).
Spindle thread: M10
Rated voltage: 240V.
Frequency: 50Hz.
No load speed: 11,500rpm.

Kobe Power Tools

The Kobe HAG200-D hot air gun has three stage air flow and touch button temperature control of between 60 to 600°C, displayed on an LCD display at the rear of the gun.

Suitable for a countless applications such as soldering, welding PVC, shaping, drying, shrink-fitting, stripping paint, removing sticky labels etc.

Features include:
Two metre industrial grade rubber power cord fitted with a 3 pin plug.
Supplied with 4 detachable nozzles and a paint scraper.
Stainless steel nozzle outlet and detachable heat protection sleeve allows for access into narrow areas.
Overheating protection.
Can be used free standing on a work surface facing upwards for hands free use.
Air inlet with lattice guard to keep out foreign matter.
Supplied in a tough blow moulded carrying case.

HAG200-D Hot Air Gun

HAG200-D Specification:
Power Supply: 230V~50Hz.
Input Power: 2000W.
Airflow and temperature:
Stage I 350L/min 60°C (140°F)
Stage II 350L/min 60°-600°C (140-1,112°F)
Stage III 550L/min 60°-600°C (140-1,112°F)
Weight Gun: 910g

Supplied with:
1x Reflector Nozzle.
1x Surface Nozzle.
1x Window Nozzle.
1x Reduction Nozzle.
Paint Scrapper.
Supplied in carry case.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe™ "Oil-Free" Compressors

These Direct Drive oil-free compressors are built of quality materials to ensure trouble free use and can be run on a normal 240v domestic supply. Robust in manufacture, they all come with a pressure cut-off switch, fully automatic stop/start control, tank and line pressure gauges and an air outlet regulator.

2HP 46Ltr Compressor

These two compressors share the same robust 2HP direct drive motor producing an 8Bar/115psi working pressure and an air supply of 8CFM/230Ltr/min which is enough to run most air tools.