Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe Cordless Drill Drivers

The Kobe DDH180 is a light-weight and well-balanced high performance variable speed reversible hammer drill with electric brake. Fast selection of hammer-drill/drill-driver mode is made by rotating the selection collar with 20 stage torque selection for precise screw driving.

Features include:
Soft grip design.
Built in LED light.
13mm keyless chuck.
Supplied complete with carry case: 2x 18v (1.5Ah) Li-ion Batteries, charger and spare carbon brushes.

DDH180 18V (1.5Ah) Li-ion Hammer Drill Driver

Specification for Kobe DDH180:
Battery: 18v (1.5Ah) Li-ion
Chuck capacity: 13mm
No load speed: 0-400/0-1400rpm
Net weight: 4.05kg
Maximum torque: 35Nm
Drilling capacities:
Steel: 13mm
Aluminium: 15mm
Wood: 28mm
Masonry: 13mm
Impacts per minute: 0-21000ipm
Vibration level: IS 8.16 m/s2
N0-load: 8.19m/s2
Sound power level: LWA=93.01dB(A)
Sound pressure level: LPA=82.01dB(A)
Charging time: 30min
Charger input: 230V-240V~50Hz
Charger output: 20.6V DC 3A
Charger power consumption: 100W

Supplied with: 2x 18v (1.5Ah) batteries, 30 Minute Quick Charge with AFCS
Patented Air-Forced Cooling System (AFCS) design with a cooling fan and heat-extraction vents and robust carry case.

Kobe? Plastic Air Blow Gun

Trigger operated blowgun with angled 110mm long nozzle lance. Lightweight impact resistant nylon body with hanging point, high grip handle with fitted 1/4" BSP brass air inlet ferrule. Suitable for quick removal of chips, swarf, dust and particulate from any surface. Ideal for production line, factory, workshop or body shop use. The long extended nozzle allows the airflow to be directed into the area it is required.

Specifications:
Operating temperature range: -10C to 50C.
Minimum working pressure: 43psi (3 bar).
Maximum operating pressure: 150psi (10 bar).

Velcro Backed Sanding Discs

No spanners required. 100% of disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied. Silicon carbide abrasive epecially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes. Can be used wet or dry.



50mm (2"). Pack 25

Kobe Diamond Core Drill

Kobe Diamond core drills are a dry cutting, high performance diamond Core Drill. For use with arbor and guide rod (hex shank or SDS Plus) plus extension, if required.

Manufactured from tool grade steel for perfect concentricity. Can be used across a wide range of building materials such as: facing bricks, concrete blocks, breeze blocks, building blocks, hand made bricks and soft to medium hard natural stones. Mounting thread is 1/2" BSP.

Diamond Core Drill

Kobe? Sanding Sheets

Packs of 10 in 60 grit, 100 grit and 150 grit.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe™ "Oil-Free" Compressors

These Direct Drive oil-free compressors are built of quality materials to ensure trouble free use and can be run on a normal 240v domestic supply. Robust in manufacture, they all come with a pressure cut-off switch, fully automatic stop/start control, tank and line pressure gauges and an air outlet regulator.

2HP 46Ltr Compressor

These two compressors share the same robust 2HP direct drive motor producing an 8Bar/115psi working pressure and an air supply of 8CFM/230Ltr/min which is enough to run most air tools.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.