York? Clean "n Strip Unitised Surface Cleaner

High stock removal producing a very good finish. Cleans surfaces faster and more effectively than wire brushes, scrapers or pickling pastes. As there is no metal components used in the manufacture of these high strength cool cutting discs, accidental damage to the work piece is eliminated. Suitable for grinding right into corners, across contours and in hard to reach areas. Ideally suitable for preparation and cleaning of welds, rust removal and removal of discolouration.

Unitised Wheels

Requires 6mm mandrel supplied separately: YRK-280-5010K.

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)13mm x (W)10mm.

York? File Belts

Suitable for a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



6mm Wide x 330mm Long.

York G-VA Polishing Flap Disc

The York G-VA Polishing Flap Discs are manufactured with high quality felt flaps and are ideal for use with polishing compounds to produce polished mirror finishes on metal.

G-VA Polishing Flap Disc

Available sizes:

115mm x22.23mm Order Code: YRK-247-4720K
125mm x22.23mm Order Code: YRK-247-4740K

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 40mm Height 7,700 MOS (rpm)

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Pointed Tree

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

York? Open Type Polishing Mops

Designed to produce high quality finishes on non-ferrous metals such as brass, copper, aluminium and pewter. Can also be used on plastics for a medium finish. The open type construction is best used with medium polishing pressure. Can be used with our fast cutting and mirror finish polishing bars.

Soft

York? Abrasive Blocks

Rubber sanding blocks impregnated with abrasive. Remains abrasive throughout the block. For industrial sanding/cleaning components and surfaces.

Wine - Extra Coarse

36 Grit