York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

York? File Belts

Suitable for a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



20mm Wide x 480mm Long.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Aluminium Backed (General-Purpose)

127mm Dia x 22mm Bore 12,000 MOS (rpm).

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Aluminium Oxide Grade Glass Fibre Backed (General-Purpose - Non-Scratch)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade A30/A24. For general-purpose use on metals.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

York? Quick Change Screw Fitting Discs

For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC? system holders.



Zirconia Alumina Abrasive Discs for grinding and finishing of stainless steel.

York? File Belts

Suitable for a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.

Packs of 10

6mm Wide x 457mm Long.

York? Nylon Finishing Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Finishing Wheel 50 x 50mm

Ideal for: Matching/blending a finish, light deburring, decorative/cosmetic applications.

York? File Belts

Suitable for a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



6mm Wide x 330mm Long.