British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Castrol Lubricants

The Castrol Hyspin AWS? hydraulic oil range is based upon highly refined mineral oil enhanced with a stabilised zinc additive system, it is available in a range of viscosities to meet your specific requirements.

Hyspin AWS? Antiwear Hydraulic Oils

Castrol Hyspin AWS? hydraulic oil has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS? has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS? provides corrosion protection to ferrous and yellow metal components found within a hydraulic system.
This range is designed for use in industrial hydraulic systems, which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings.

Advantages
Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
Good filter ability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.

The Hyspin AWS? range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin AWS? is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM
Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220

Janitol® Fective

A low viscosity, high performance, non-solvent machinery degreaser. Low foaming formulation makes it ideal for use in all types of heated equipment. Good grease cutting properties cope with the heaviest of soilings.

Enamel Paint

High gloss rust covering enamel paint. Corrosion resistant, can be applied directly to rusty metal and repels moisture providing long term protection. Touch dry in 20 mins (subject to humidity/temperature), no need for primer or undercoat. Coverage 0.6m2 per 500ml can.

Smooth Finish - Aerosol

Food Safe Compressor Oils

These compressor oils are fully synthetic, comply with FDA regulations and are H1 registered. Designed for use in food production and pharmaceutical industries they have a low friction coefficient reducing wear and energy comsumption. They reduce residue, varnish and scum build up which leads to lower maintenance costs, downtime and loss of productivity.

Food Safe Comp Tech Oil G68 grade

WD-40 Maintenance Liquid

Penetrates and lubricates moving parts, hinges, castors etc. Drives out moisture on metal parts. Cleans and protects, dissolves grease, tar and adhesives. Also loosens rusted parts and frees sticky mechanisms.
Contains Petroleum Naphtha: May cause drying of skin and/or irritation.

WD-40

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Leak Detector Spray

A specially formulated, high performance, white fluid, designed specifically to identify even the smallest gaseous leak. Applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints, bubbles in the applied film indicate the location of the leak. Aerosol enables fast and easy application. Convenient and accurate in difficult to reach areas. No wastage or spillage. Propelled by compressed air - will not give a false reading if mechanical sensing equipment is used. Long shelf life, unlike other CO2 propelled leak detector sprays, the pressure will not not drop off due to CO2 degradation during storage. Suitable for use with most common industrial gases including compressed air, acetylene, butane, propane, chlorine, hydrogen, and natural gas. Not recommended for use on medical equipment where there could be a risk of ingress into the patient airway. Supplied in a 400ml aerosol.

Food Safe Hydraulic Oils

Designed for use in areas where incidental contact may occur, these oils are based on high quality synthetic grade oils, compounded with state of the art anti-corrosion and EP substances. Non-toxic, they comply with FDA regulations and are InS H1 registered.

Food Safe Hydraulic Oil Grade G68

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

25ltr Small Poly Bin Spill Kit

Contents:
17 x pads.
1 x sock.
2 x pillows.
4 x disposal bags.